LAN-XI Light 3676 Input Module Data acquisition systems
Type 3676 is a stand-alone four-input module for laboratory and field sound and vibration measurements. Its inputs support signals up to ±10 V or CCLD/IEPE-powered sensors. It connects over TCP/IP. Match input mode, bandwidth and recording setup to the sensors and test requirements.
This series on the HBK site (opens in a new tab)Models in the series
One column per model: what differs between the models of the series.
| Parameter | -3676-B-040-R |
|---|---|
| Number of measurement channels | 4 |
| Interfaces | Ethernet |
| Protection class (DIN EN 60529) | IP31 |
| ADC sampling rate | 65500 samples/s |
| Linearity reference | Accuracy depends on the selected input and range. |
| Frequency response | 0–25.6 kHz |
| Repeatability reference | System repeatability depends on the configured transducer, excitation, range, synchronization and calibration. |
| Operating temperature | -10–55 °C |
| Sampling rate reference | Official indexed maximum sample-rate selection: 65,500 Hz. |
| Technical specification details | Inputs: Standardized voltage (+/- 10V), IEPE / CCLD; Outputs: None; Housing: Frame; Interfaces: TCP/IP |
| Status | Active |
The industries we serve
Frequently asked questions
Answers to the most common questions about our products and services
The module has four inputs. It is intended for signal acquisition and has no built-in generator channel.
HBK lists ±10 V or CCLD/IEPE inputs. Select the input mode to match the sensor’s signal and power requirements.
The input frequency range is DC to 25.6 kHz. The published sample rate is approximately 65.5 kS/s.
The module connects over TCP/IP. Configure the network and software for the recording setup and participating computers.
HBK describes the module for stand-alone field and laboratory use and lists data storage as a capability. Select the power source and storage medium for the test.
Get a quote or advice
Tell us what you need and an engineer will come back to you.