Skip to content

QuantumX MX1615B Data acquisition systems

The MX1615B is a 16-channel QuantumX module for load and strain testing. It accepts full, half and quarter bridges, with built-in 120 and 350 Ω quarter-bridge completion. Each channel can be configured individually. Suitable channel configurations also accept voltage or resistive temperature sensors.

Download the datasheet (opens in a new tab) This series on the HBK site (opens in a new tab)

Models in the series

One column per model: what differs between the models of the series.

Models of QuantumX MX1615B compared by parameter
Parameter MX1615B
Number of measurement channels 16
Sensor excitation True
Linearity reference Accuracy is signal-, range-, filter- and module-specific; use the exact table in the official QuantumX brochure.
ADC sampling rate 19200 samples/s
Interfaces Ethernet
Repeatability reference System repeatability depends on the transducer, bridge excitation, thermal state, wiring, calibration and selected digital filter.
Technical specification details sixteen-channel full/half/quarter-bridge amplifier with 120 Ω and 350 Ω quarter-bridge completion plus RTD, resistance, potentiometer and voltage inputs
Accuracy (% FSO) 0.05 %
Sampling rate reference 20,000 samples/s/channel published maximum with 3,000 Hz published bandwidth.
Status Active
Datasheet PDF — MX1615B (opens in a new tab)

The industries we serve

Frequently asked questions

Answers to the most common questions about our products and services

It accepts full, half and quarter bridges. For a quarter bridge, select the completion resistance that matches the strain gauge.

The module has 120 and 350 Ω quarter-bridge completion resistors. Check the gauge wiring against the connection instructions.

The module has 16 inputs. Select the signal type and acquisition settings for each channel according to its connected sensor.

HBK lists up to 20 kS/s per channel and a signal bandwidth up to 3 kHz. Set the filter and sample rate for the frequencies required in the test.

Yes. The module supports Pt100, Pt500 and Pt1000 resistance temperature detectors. Configure the channel for the sensor type and wiring.

Didn't find the answer you were looking for?

Talk to an expert

More information

Get a quote or advice

Tell us what you need and an engineer will come back to you.

Request a quote for this product
What would you like to ask for?

Email or phone — one of them is enough

Email or phone — one of them is enough

0 of 500 words