Skip to content

IFD2410-1/IE

From the confocalDT IFD2410 series

All-in-one confocal sensor and controller for distance and single-layer transparent thickness measurement. The measuring rate is adjustable up to 8 kHz.

Download the datasheet (opens in a new tab) This series on the Micro-Epsilon site (opens in a new tab)

Technical specification

Every engineering figure, laid out to scan quickly

Technical specification for IFD2410-1/IE
Measuring range 1 mm
Start of measuring range 15 mm
Linearity 0.25 µm
Measuring rate 8 kHz
Light spot diameter 0.012 mm
Maximum measuring angle 25 deg
Numerical aperture (NA) 0.45
Layers in multi-peak measurement 1 layer
Power consumption 5.3 W
Storage temperature -20–70 °C
Operating temperature 5–50 °C
Weight 0.49 kg
Electrical connection 12-pin M12 for supply, encoder, EtherCAT, PROFINET, EtherNet/IP, RS422 and sync; 17-pin M12 for I/O, analog and encoder; optional 3/6/9/15 m cable extension.
Mounting Radial clamping (see accessories for mounting adapter), threaded holes
Permissible ambient light 30,000 lx
Accuracy 0.25 µm
Minimum target thickness 0.05 mm
Target material Reflective, diffuse as well as transparent surfaces (e.g. glass)
Contact Non-contact

Values by configuration

These values differ with the controller or interface the sensor is used with. Each row applies to one configuration only; check the configuration in the system builder or with us.

Interfaces EtherCAT
Interfaces PROFINET
Interfaces RS422
Interfaces EtherNet/IP
Protection class (DIN EN 60529) IP64
Protection class (DIN EN 60529) integrated controller of IFD2410-1/IE; not optical-head IP: ip65
Resolution 0.006 µm
Resolution 0.05 µm
Request a quote for this product

The industries we serve

Frequently asked questions

Answers to the most common questions about our products and services

The measuring span is 1 mm and starts approximately 15 mm from the sensor face. Position the target so that the expected motion stays within the window.

The datasheet specifies less than 50 nm RMS noise at mid-span at a 1 kHz measuring rate. This value describes noise under the specified test conditions.

This model integrates the optical head and controller and supports Industrial Ethernet. Check which protocol is active and whether the machine controller supports it.

Didn't find the answer you were looking for?

Talk to an expert

More information

Get a quote or advice

Tell us what you need and an engineer will come back to you.

Request a quote for this product
What would you like to ask for?

Email or phone — one of them is enough

Email or phone — one of them is enough

0 of 500 words