Skip to content

IFD2410-1

From the confocalDT IFD2410 series

All-in-one confocal sensor and controller for distance and single-layer transparent thickness measurement. The measuring rate is adjustable up to 8 kHz.

Number of measurement channels
1
Download the datasheet (opens in a new tab) This series on the Micro-Epsilon site (opens in a new tab)

Technical specification

Every engineering figure, laid out to scan quickly

Technical specification for IFD2410-1
Measuring range 1 mm
Start of measuring range 15 mm
Linearity 0.25 µm
Measuring rate 8 kHz
Light spot diameter 0.012 mm
Maximum measuring angle 25 deg
Numerical aperture (NA) 0.45
Layers in multi-peak measurement 1 layer
Power consumption 5.3 W
Outputs and interfaces Digital I/O
Number of measurement channels 1
Storage temperature -20–70 °C
Operating temperature 5–50 °C
Weight 0.49 kg
Electrical connection 12-pin M12 for supply, Ethernet, RS422 and sync; 17-pin M12 for I/O, analog and encoder; optional 3/6/9/15 m cable extension.
Mounting Radial clamping (see accessories for mounting adapter), threaded holes
Permissible ambient light 30,000 lx
Technical specification details 1 mm net measuring range
Accuracy 0.25 µm
Adjustable measuring rate range 100–8000 Hz
Minimum target thickness 0.05 mm
Target material Reflective, diffuse as well as transparent surfaces (e.g. glass)
Sampling rate reference IFD2410 integrated controller: up to 25 kHz on the manufacturer product page
Linearity reference https://www.micro-epsilon.com/fileadmin/download/products/dat--confocalDT-IFD2410--en.pdf published optical-probe linearity; axial resolution is not substituted for linearity.
Contact Non-contact

Values by configuration

These values differ with the controller or interface the sensor is used with. Each row applies to one configuration only; check the configuration in the system builder or with us.

Interfaces Ethernet
Interfaces EtherCAT
Interfaces RS422
Output resolution 32 bit
Output resolution 18 bit
Protection class (DIN EN 60529) IP65
Protection class (DIN EN 60529) IP64
Resolution 0.05 µm
Resolution 0.006 µm
Request a quote for this product

The industries we serve

Frequently asked questions

Answers to the most common questions about our products and services

The Ethernet model has a 1 mm measuring span starting approximately 15 mm from the sensor face. Use both dimensions to position the target before commissioning.

The measuring rate is continuously adjustable from 100 Hz to 8 kHz. Set it for the process and separately verify how the machine controller receives the data.

The model supports thickness measurement of one transparent layer when the two surfaces give distinct returns and the refractive index is configured. For multilayer measurement, evaluate the IFD2415.

The optical head and controller are in one unit. Provide the power and data connections specified for the Ethernet version.

Didn't find the answer you were looking for?

Talk to an expert

More information

Get a quote or advice

Tell us what you need and an engineer will come back to you.

Request a quote for this product
What would you like to ask for?

Email or phone — one of them is enough

Email or phone — one of them is enough

0 of 500 words