IFD2410-3/IE
From the confocalDT IFD2410 series
All-in-one confocal sensor and controller for distance and single-layer transparent thickness measurement. The measuring rate is adjustable up to 8 kHz.
Download the datasheet (opens in a new tab) This series on the Micro-Epsilon site (opens in a new tab)
Technical specification
Every engineering figure, laid out to scan quickly
| Measuring range | 3 mm |
|---|---|
| Start of measuring range | 25 mm |
| Linearity | 0.75 µm |
| Measuring rate | 8 kHz |
| Light spot diameter | 0.018 mm |
| Maximum measuring angle | 19 deg |
| Numerical aperture (NA) | 0.35 |
| Layers in multi-peak measurement | 1 layer |
| Power consumption | 5.3 W |
| Storage temperature | -20–70 °C |
| Operating temperature | 5–50 °C |
| Weight | 0.49 kg |
| Electrical connection | 12-pin M12 for supply, encoder, EtherCAT, PROFINET, EtherNet/IP, RS422 and sync; 17-pin M12 for I/O, analog and encoder; optional 3/6/9/15 m cable extension. |
| Mounting | Radial clamping (see accessories for mounting adapter), threaded holes |
| Permissible ambient light | 30,000 lx |
| Accuracy | 0.75 µm |
| Minimum target thickness | 0.15 mm |
| Target material | Reflective, diffuse as well as transparent surfaces (e.g. glass) |
| Contact | Non-contact |
Values by configuration
These values differ with the controller or interface the sensor is used with. Each row applies to one configuration only; check the configuration in the system builder or with us.
| Interfaces | PROFINET |
|---|---|
| Interfaces | EtherCAT |
| Interfaces | EtherNet/IP |
| Interfaces | RS422 |
| Protection class (DIN EN 60529) | IP64 |
| Protection class (DIN EN 60529) | integrated controller of IFD2410-3/IE; not optical-head IP: ip65 |
| Resolution | 0.018 µm |
| Resolution | 0.125 µm |
Compatible accessories
Cables
Power supplies
Complementary products
The industries we serve
Frequently asked questions
Answers to the most common questions about our products and services
The measuring span is 3 mm and starts approximately 25 mm from the sensor face. Position the target so that the expected motion stays within the window.
The datasheet specifies less than 125 nm RMS noise at mid-span at a 1 kHz measuring rate. This value describes noise under the specified test conditions.
This model integrates the optical head and controller and supports Industrial Ethernet. Check which protocol is active and whether the machine controller supports it.
Get a quote or advice
Tell us what you need and an engineer will come back to you.






