Skip to content

IFD2415-3

From the confocalDT IFD2415 series

Integrated confocal sensor and controller for distance and thickness measurement of up to five transparent layers. The measuring rate is adjustable up to 25 kHz.

Number of measurement channels
1
Download the datasheet (opens in a new tab) This series on the Micro-Epsilon site (opens in a new tab)

Technical specification

Every engineering figure, laid out to scan quickly

Technical specification for IFD2415-3
Measuring range 3 mm
Start of measuring range 20 mm
Linearity 0.6 µm
Measuring rate 25 kHz
Light spot diameter 0.009 mm
Maximum measuring angle 24 deg
Numerical aperture (NA) 0.45
Layers in multi-peak measurement 5 layers
Power consumption 7 W
Outputs and interfaces Digital I/O
Number of measurement channels 1
Storage temperature -20–70 °C
Operating temperature 5–50 °C
Weight 0.6 kg
Electrical connection 12-pin M12 for supply, Ethernet, RS422 and sync; 17-pin M12 for I/O, analog and encoder; optional 3/6/9/15 m cable extension.
Mounting Radial clamping (see accessories for mounting adapter), threaded holes
Permissible ambient light 30,000 lx
Technical specification details 3 mm net measuring range
Accuracy 0.6 µm
Minimum target thickness 0.15 mm
Target material Reflective, diffuse as well as transparent surfaces (e.g. glass)
Sampling rate reference IFD2415 integrated controller: up to 25 kHz; multi-peak thickness mode is documented for transparent layers
Linearity reference https://www.micro-epsilon.com/fileadmin/download/products/dat--confocalDT-IFD2415--en.pdf published optical-probe linearity; axial resolution is not substituted for linearity.
Contact Non-contact

Values by configuration

These values differ with the controller or interface the sensor is used with. Each row applies to one configuration only; check the configuration in the system builder or with us.

Interfaces EtherNet/IP
Interfaces EtherCAT
Interfaces RS422
Interfaces Ethernet
Interfaces PROFINET
Output resolution 18 bit
Output resolution 32 bit
Protection class (DIN EN 60529) IP65
Protection class (DIN EN 60529) IP64
Resolution 0.015 µm
Resolution 0.008 µm
Resolution 0.08 µm
Request a quote for this product

The industries we serve

Frequently asked questions

Answers to the most common questions about our products and services

The measuring span is 3 mm, starting approximately 20 mm from the sensor face. Mount the sensor so target motion and height changes stay inside this window.

The datasheet specifies thickness measurement of up to five transparent layers. Practical suitability depends on resolving the interface returns and setting the materials’ refractive indices.

The rate is adjustable from 100 Hz to 25 kHz. For production-line integration, also verify the communication settings and the rate at which the receiving controller gets data.

Didn't find the answer you were looking for?

Talk to an expert

More information

Get a quote or advice

Tell us what you need and an engineer will come back to you.

Request a quote for this product
What would you like to ask for?

Email or phone — one of them is enough

Email or phone — one of them is enough

0 of 500 words