MSC7802
From the induSENSOR MSC controller components series
induSENSOR MSC controller components: measurement controllers by Micro-Epsilon for inductive (eddy current).
- Number of measurement channels
- 2
Technical specification
Every engineering figure, laid out to scan quickly
| Linearity (% FSO) | ≤ ±0.02 % FSO |
|---|---|
| Current consumption | 80 mA |
| Interfaces | RS-485 |
| Number of measurement channels | 2 |
| Storage temperature | -40 °C / 85 °C |
| Operating temperature | -40 °C / 85 °C |
| Protection class (DIN EN 60529) | IP67 (plugged) |
| Frequency response cutoff Maximum rate with a compatible controller | 300 Hz; bandwidth, not ADC sample rate |
| Fieldbus interface module required | Yes |
| Sensor input impedance | > 100000 Ω |
| Temperature stability with DTA | ≤ 100 ppm FSO/K |
| Temperature stability with LDR | ≤ 125 ppm FSO/K |
| Compatible sensor types | DTA full-bridge/LVDT / LDR half-bridge |
| Outputs at 5 V supply | No voltage output; current-output load ≤100 Ω at 5 V supply |
| Outputs at 9 V supply | 0.5–4.5 V or 0–5 V output; current-output load ≤250 Ω at 9 V supply |
| Current-output limit | 21 mA |
| Weight | approx. 280 g |
| Interfaces via separate adapter | profinet / ethernet_ip / ethercat |
Values by configuration
These values differ with the controller or interface the sensor is used with. Each row applies to one configuration only; check the configuration in the system builder or with us.
| Channel query-response time | 2 ms |
|---|---|
| Channel query-response time | 2.5 ms |
| Channel query-response time | 4 ms |
| Resolution (% FSO) | 0.012 % |
| Resolution (% FSO) | 0.024 % |
| Resolution (% FSO) | 0.048 % |
The industries we serve
Get a quote or advice
Tell us what you need and an engineer will come back to you.