Skip to content

Configurable load cell measuring chain – LCMC Force

Configurable load cell measuring chain - LCMC: sensors and measurement devices by HBK for force.

Download the datasheet (opens in a new tab) This series on the HBK site (opens in a new tab)

Shared technical specifications for the series

Properties every model in the series has. What differs is in the models table below.

Technical specification for Configurable load cell measuring chain – LCMC
Ordering options and constraints K-LCMC — load_cell_type: PW2C, PW2D, PW6C, PW6D, PW4M-OP, PW10A, PW12C, PW15AH, PW15B, PW16A, PW22, SP4M, SP8, Z6; measurement_electronics: RMIO, 105C, 105R, 112C, 112R, RM42, RM43; connector: M12A8, M12A4; constraints: [{"when": {"measurement_electronics": "RMIO"}, "allow": {"connector": "M12A4"}, "reason": "HBK specifies the 4-pin M12 connector for the IO-Link RMIO option."}, {"when": {"measurement_electronics": ["105C", "105R", "112C", "112R", "RM42", "RM43"]}, "allow": {"connector": "M12A8"}, "reason": "HBK specifies the 8-pin M12 connector for these CAN, RS-485 and analog electronics options."}]

Models in the series

One column per model: what differs between the models of the series.

Models of Configurable load cell measuring chain – LCMC compared by parameter
Parameter K-LCMC
Interfaces CANopen
Outputs and interfaces RS422 / RS485
Technical specification details Configurable family; exact public ordering-code table not exposed on the current HBK page.
Status Active
Datasheet PDF — K-LCMC (opens in a new tab)

The industries we serve

Frequently asked questions

Answers to the most common questions about our products and services

LCMC combines a selected load cell, signal-processing electronics and an interface to the control system. HBK supplies the chain in the configuration selected for the application.

Options include IO-Link, CANopen, RS-485, 0–10 V or 4–20 mA, depending on the version. Match the selected interface to the input and communications supported by the installed system.

Select a voltage or current version to match the controller input. Then configure signal scaling in the controller for the load range of the chosen chain.

Where the control system supports IO-Link, the selected version can supply weight data and diagnostic information. Check that the device configuration and hardware match the implementation.

Define nominal load, mounting geometry, load-cell type and the required interface. Choose the interface together with the mechanical load cell that suits the weighing application.

Didn't find the answer you were looking for?

Talk to an expert

More information

Get a quote or advice

Tell us what you need and an engineer will come back to you.

Request a quote for this product
What would you like to ask for?

Email or phone — one of them is enough

Email or phone — one of them is enough

0 of 500 words