FS62CSS Strain
FS62CSS measures strain in one direction on substrates such as concrete, steel and composites. The sensing area helps average local variations on nonuniform surfaces. The sensor bonds to the structure and can be ordered with a metal-free aramid cable or an armored cable.
Visit the HBK site (opens in a new tab)
Models in the series
One column per model: what differs between the models of the series.
| Parameter | 1-FS62CSS-ARM/1510 | 1-FS62CSS-ARM/1520 | 1-FS62CSS-ARM/1530 | 1-FS62CSS-ARM/1540 | 1-FS62CSS-ARM/1550 | 1-FS62CSS-ARM/1560 | 1-FS62CSS-ARM/1570 | 1-FS62CSS-ARM/1580 | 1-FS62CSS-ARM/1590 | K-FS62CSS |
|---|---|---|---|---|---|---|---|---|---|---|
| Technical specification details | Strain gauge; Linear; FBG (ca. 0.79); Limited temperature range; No matching of temperature response; Optical fiber (for optical fibers (FC/APC, SC/APC, splice); Bondable | Strain gauge; Linear; FBG (ca. 0.79); Limited temperature range; No matching of temperature response; Optical fiber (for optical fibers (FC/APC, SC/APC, splice); Bondable | Strain gauge; Linear; FBG (ca. 0.79); Limited temperature range; No matching of temperature response; Optical fiber (for optical fibers (FC/APC, SC/APC, splice); Bondable | Strain gauge; Linear; FBG (ca. 0.79); Limited temperature range; No matching of temperature response; Optical fiber (for optical fibers (FC/APC, SC/APC, splice); Bondable | Strain gauge; Linear; FBG (ca. 0.79); Limited temperature range; No matching of temperature response; Optical fiber (for optical fibers (FC/APC, SC/APC, splice); Bondable | Strain gauge; Linear; FBG (ca. 0.79); Limited temperature range; No matching of temperature response; Optical fiber (for optical fibers (FC/APC, SC/APC, splice); Bondable | Strain gauge; Linear; FBG (ca. 0.79); Limited temperature range; No matching of temperature response; Optical fiber (for optical fibers (FC/APC, SC/APC, splice); Bondable | Strain gauge; Linear; FBG (ca. 0.79); Limited temperature range; No matching of temperature response; Optical fiber (for optical fibers (FC/APC, SC/APC, splice); Bondable | Strain gauge; Linear; FBG (ca. 0.79); Limited temperature range; No matching of temperature response; Optical fiber (for optical fibers (FC/APC, SC/APC, splice); Bondable | Strain gauge; Linear; FBG (ca. 0.79); Limited temperature range; No matching of temperature response; Optical fiber (for optical fibers (FC/APC, SC/APC, splice); Bondable |
| Outputs and interfaces | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown |
| Status | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active |
The industries we serve
Frequently asked questions
Answers to the most common questions about our products and services
It can be bonded to concrete, steel and composites. Surface preparation and adhesive selection depend on the substrate and installation conditions.
The specified strain range is ±5,000 µm/m along the sensing direction.
Choose aramid where the cable must be free of metallic components. An armored cable adds mechanical protection where the fiber route is exposed to damage.
Check the curvature of the mounting surface. The datasheet specifies a bend radius greater than 1,000 mm for the sensor itself.
HBK recommends the FS63CTS optical temperature sensor as a companion measurement. Apply compensation in data processing for the structure and measurement conditions.
Get a quote or advice
Tell us what you need and an engineer will come back to you.