FS62RSS Strain
FS62RSS measures strain in one direction for infrastructure monitoring. One version is installed within concrete during casting, and another bolts onto a drillable surface. The two versions have different measurement ranges.
This series on the HBK site (opens in a new tab)
Models in the series
One column per model: what differs between the models of the series.
| Parameter | K-FS62RSS |
|---|---|
| Outputs and interfaces | Unknown |
| Technical specification details | Strain gauge; Linear; FBG (ca. 0.79); Limited temperature range; No matching of temperature response; Optical fiber (for optical fibers (FC/APC, SC/APC, splice); Embeddable |
| Status | Active |
The industries we serve
Frequently asked questions
Answers to the most common questions about our products and services
The embedded version is designed to be cast into concrete. Plan the sensor position and protect the fiber route before the pour.
Yes. The surface-mount version attaches to a suitable drillable substrate with M6 bolts.
The embedded version is rated for ±2,500 µm/m. The bolt-on version is rated for ±5,000 µm/m.
HBK specifies IP68 for the sensor under the datasheet test conditions. Also check the protection of the connections and fiber route for the installation.
HBK recommends the FS63RTS as a companion temperature measurement for compensating strain readings.
Get a quote or advice
Tell us what you need and an engineer will come back to you.