FS62WSS Strain
FS62WSS is spot-welded to metal parts to measure strain in one direction. Measurements can begin once installation is complete. Cable variants have different strain ranges and environmental limits, so consult the datasheet for the selected version.
Visit the HBK site (opens in a new tab)
Models in the series
One column per model: what differs between the models of the series.
| Parameter | 1-FS62WSS-ARM/1510 | 1-FS62WSS-ARM/1520 | 1-FS62WSS-ARM/1530 | 1-FS62WSS-ARM/1540 | 1-FS62WSS-ARM/1550 | 1-FS62WSS-ARM/1560 | 1-FS62WSS-ARM/1570 | 1-FS62WSS-ARM/1580 | 1-FS62WSS-ARM/1590 | K-FS62WSS |
|---|---|---|---|---|---|---|---|---|---|---|
| Technical specification details | Strain gauge; Linear; FBG (ca. 0.79); Limited temperature range; No matching of temperature response; Optical fiber (for optical fibers (FC/APC, SC/APC, splice); Weldable | Strain gauge; Linear; FBG (ca. 0.79); Limited temperature range; No matching of temperature response; Optical fiber (for optical fibers (FC/APC, SC/APC, splice); Weldable | Strain gauge; Linear; FBG (ca. 0.79); Limited temperature range; No matching of temperature response; Optical fiber (for optical fibers (FC/APC, SC/APC, splice); Weldable | Strain gauge; Linear; FBG (ca. 0.79); Limited temperature range; No matching of temperature response; Optical fiber (for optical fibers (FC/APC, SC/APC, splice); Weldable | Strain gauge; Linear; FBG (ca. 0.79); Limited temperature range; No matching of temperature response; Optical fiber (for optical fibers (FC/APC, SC/APC, splice); Weldable | Strain gauge; Linear; FBG (ca. 0.79); Limited temperature range; No matching of temperature response; Optical fiber (for optical fibers (FC/APC, SC/APC, splice); Weldable | Strain gauge; Linear; FBG (ca. 0.79); Limited temperature range; No matching of temperature response; Optical fiber (for optical fibers (FC/APC, SC/APC, splice); Weldable | Strain gauge; Linear; FBG (ca. 0.79); Limited temperature range; No matching of temperature response; Optical fiber (for optical fibers (FC/APC, SC/APC, splice); Weldable | Strain gauge; Linear; FBG (ca. 0.79); Limited temperature range; No matching of temperature response; Optical fiber (for optical fibers (FC/APC, SC/APC, splice); Weldable | Strain gauge; Linear; FBG (ca. 0.79); Limited temperature range; No matching of temperature response; Optical fiber (for optical fibers (FC/APC, SC/APC, splice); Weldable |
| Outputs and interfaces | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown |
| Status | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active |
The industries we serve
Frequently asked questions
Answers to the most common questions about our products and services
Prepare the surface and attach the gauge substrate by spot welding. For the braided version, HBK recommends checking the welding settings on a trial plate before attaching the sensor.
Yes. The BRD braided version is rated for ±10,000 µm/m. The aramid and armored versions are specified for ±5,000 µm/m.
Choose aramid or armored cable according to the mechanical exposure of the cable route. Also check the protection required at the welded area and the environmental limits in HBK’s instructions.
The FS62WSS measures along one axis. Use the weldable FS62WSR rosette when three angles are required on the same metal surface.
The FS63WTS is a spot-weldable optical temperature sensor that can be added to correct for temperature effects.
Get a quote or advice
Tell us what you need and an engineer will come back to you.