FS66HDL Force
FS66HDL is an optical shear-beam force transducer for pantograph monitoring. The datasheet lists a standard 0–500 N range and bidirectional calibration on request. The transducer can be paired with the FS65HDA to measure force and acceleration in one system.
Download the datasheet (opens in a new tab) This series on the HBK site (opens in a new tab)
Models in the series
One column per model: what differs between the models of the series.
| Parameter | FS66HDL |
|---|---|
| Technical specification details | Configurable family; exact public ordering-code table not exposed on the current HBK page. |
| Outputs and interfaces | Unknown |
| Status | Active |
| Datasheet | PDF — FS66HDL (opens in a new tab) |
The industries we serve
Frequently asked questions
Answers to the most common questions about our products and services
In HBK’s pantograph monitoring system, a shear beam instrumented with FBGs measures force. A separate FS65HDA sensor measures acceleration.
Yes. The standard range is 0–500 N, and HBK’s datasheet lists calibration for ±500 N on request.
HBK specifies resolution below 1 N with 1 pm wavelength measurement resolution, as provided by the MXFS interrogator.
The specified operating range is −20°C to 75°C. The datasheet separately lists temperature effects on zero and on the calibration factor.
The datasheet lists a Huber+Suhner Q-ODC-2 connector and a nominal 8 m dual-fiber cable. The system must provide a corresponding connection.
Get a quote or advice
Tell us what you need and an engineer will come back to you.