TOP-Transfer Force
HBK’s TOP-Transfer transducers transfer force references between calibration machines and measurement systems. The family uses selected Z30A and Z4A designs tested for tension and compression work. HBK lists manufacturer class 0.015 and ISO 376 class 00. Choose the amplifier and load introduction hardware and check the force range stated in the calibration certificate.
Download the datasheet (opens in a new tab) This series on the HBK site (opens in a new tab)
Shared technical specifications for the series
Properties every model in the series has. What differs is in the models table below.
Range across models
The span covered by the models of the series together — not the range of each model.
| Force range | 0–500000 N |
|---|
Models in the series
One column per model: what differs between the models of the series.
| Parameter | 1-TOP-Z30A/1000N | 1-TOP-Z30A/100N | 1-TOP-Z30A/10KN | 1-TOP-Z30A/200N | 1-TOP-Z30A/2KN | 1-TOP-Z30A/500N | 1-TOP-Z30A/5KN | 1-TOP-Z4A/100KN | 1-TOP-Z4A/200KN | 1-TOP-Z4A/20KN | 1-TOP-Z4A/500KN | 1-TOP-Z4A/50KN |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Repeatability reference | Use the individual calibration certificate and installed-chain verification; no unsupported scalar repeatability is inferred. | Use the individual calibration certificate and installed-chain verification; no unsupported scalar repeatability is inferred. | Use the individual calibration certificate and installed-chain verification; no unsupported scalar repeatability is inferred. | Use the individual calibration certificate and installed-chain verification; no unsupported scalar repeatability is inferred. | Use the individual calibration certificate and installed-chain verification; no unsupported scalar repeatability is inferred. | Use the individual calibration certificate and installed-chain verification; no unsupported scalar repeatability is inferred. | Use the individual calibration certificate and installed-chain verification; no unsupported scalar repeatability is inferred. | Use the individual calibration certificate and installed-chain verification; no unsupported scalar repeatability is inferred. | Use the individual calibration certificate and installed-chain verification; no unsupported scalar repeatability is inferred. | Use the individual calibration certificate and installed-chain verification; no unsupported scalar repeatability is inferred. | Use the individual calibration certificate and installed-chain verification; no unsupported scalar repeatability is inferred. | Use the individual calibration certificate and installed-chain verification; no unsupported scalar repeatability is inferred. |
| Technical specification details | Actions: Not sellable online; Maximum capacity (nominal load): 1 kN; Degree of protection: IP50; Mechanical interfaces: Both sides central internal thread; Height (without accessories): 3.54 in; Diameter (without cable or plug): 3.72 in | Actions: Not sellable online; Maximum capacity (nominal load): 100 N; Degree of protection: IP50; Mechanical interfaces: Both sides central internal thread; Height (without accessories): 3.54 in; Diameter (without cable or plug): 3.72 in | Actions: Not sellable online; Maximum capacity (nominal load): 10 kN; Degree of protection: IP50; Mechanical interfaces: Both sides central internal thread; Height (without accessories): 3.54 in; Diameter (without cable or plug): 3.72 in | Actions: Not sellable online; Maximum capacity (nominal load): 200 N; Degree of protection: IP50; Mechanical interfaces: Both sides central internal thread; Height (without accessories): 3.54 in; Diameter (without cable or plug): 3.72 in | Actions: Not sellable online; Maximum capacity (nominal load): 2 kN; Degree of protection: IP50; Mechanical interfaces: Both sides central internal thread; Height (without accessories): 3.54 in; Diameter (without cable or plug): 3.72 in | Actions: Not sellable online; Maximum capacity (nominal load): 500 N; Degree of protection: IP50; Mechanical interfaces: Both sides central internal thread; Height (without accessories): 3.54 in; Diameter (without cable or plug): 3.72 in | Actions: Not sellable online; Maximum capacity (nominal load): 5 kN; Degree of protection: IP50; Mechanical interfaces: Both sides central internal thread; Height (without accessories): 3.54 in; Diameter (without cable or plug): 3.72 in | Actions: Not sellable online; Maximum capacity (nominal load): 100 kN; Degree of protection: IP67; Mechanical interfaces: One side internal, one side external thread; Height (without accessories): 4.21 in; Diameter (without cable or plug): 5.75 in | Actions: Not sellable online; Maximum capacity (nominal load): 200 kN; Degree of protection: IP67; Mechanical interfaces: One side internal, one side external thread; Height (without accessories): 5.39 in; Diameter (without cable or plug): 7.09 in | Actions: Not sellable online; Maximum capacity (nominal load): 20 kN; Degree of protection: IP67; Mechanical interfaces: One side internal, one side external thread; Height (without accessories): 3.05 in; Diameter (without cable or plug): 4.53 in | Actions: Not sellable online; Maximum capacity (nominal load): 500 kN; Degree of protection: IP67; Mechanical interfaces: One side internal, one side external thread; Height (without accessories): 9.84 in; Diameter (without cable or plug): 10.83 in | Actions: Not sellable online; Maximum capacity (nominal load): 50 kN; Degree of protection: IP67; Mechanical interfaces: One side internal, one side external thread; Height (without accessories): 3.27 in; Diameter (without cable or plug): 4.72 in |
| Linearity reference | No single accuracy class is inferred when it is not shown for the exact ordering code. | No single accuracy class is inferred when it is not shown for the exact ordering code. | No single accuracy class is inferred when it is not shown for the exact ordering code. | No single accuracy class is inferred when it is not shown for the exact ordering code. | No single accuracy class is inferred when it is not shown for the exact ordering code. | No single accuracy class is inferred when it is not shown for the exact ordering code. | No single accuracy class is inferred when it is not shown for the exact ordering code. | No single accuracy class is inferred when it is not shown for the exact ordering code. | No single accuracy class is inferred when it is not shown for the exact ordering code. | No single accuracy class is inferred when it is not shown for the exact ordering code. | No single accuracy class is inferred when it is not shown for the exact ordering code. | No single accuracy class is inferred when it is not shown for the exact ordering code. |
| Sampling rate limited by system readout | True | True | True | True | True | True | True | True | True | True | True | True |
| Outputs and interfaces | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown |
| Sampling rate reference | The selected HBK conditioner, filter and DAQ determine the digital sample rate. | The selected HBK conditioner, filter and DAQ determine the digital sample rate. | The selected HBK conditioner, filter and DAQ determine the digital sample rate. | The selected HBK conditioner, filter and DAQ determine the digital sample rate. | The selected HBK conditioner, filter and DAQ determine the digital sample rate. | The selected HBK conditioner, filter and DAQ determine the digital sample rate. | The selected HBK conditioner, filter and DAQ determine the digital sample rate. | The selected HBK conditioner, filter and DAQ determine the digital sample rate. | The selected HBK conditioner, filter and DAQ determine the digital sample rate. | The selected HBK conditioner, filter and DAQ determine the digital sample rate. | The selected HBK conditioner, filter and DAQ determine the digital sample rate. | The selected HBK conditioner, filter and DAQ determine the digital sample rate. |
| Force range | 0–1000 N | 0–100 N | 0–10000 N | 0–200 N | 0–2000 N | 0–500 N | 0–5000 N | 0–100000 N | 0–200000 N | 0–20000 N | 0–500000 N | 0–50000 N |
| Accuracy class | 0.015% | 0.015% | 0.015% | 0.015% | 0.015% | 0.015% | 0.015% | 0.015% | 0.015% | 0.015% | 0.015% | 0.015% |
| Numeric manufacturer accuracy class | 0.015 | 0.015 | 0.015 | 0.015 | 0.015 | 0.015 | 0.015 | 0.015 | 0.015 | 0.015 | 0.015 | 0.015 |
| Status | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active |
| Datasheet | PDF — 1-TOP-Z30A/1000N (opens in a new tab) | PDF — 1-TOP-Z30A/100N (opens in a new tab) | PDF — 1-TOP-Z30A/10KN (opens in a new tab) | PDF — 1-TOP-Z30A/200N (opens in a new tab) | PDF — 1-TOP-Z30A/2KN (opens in a new tab) | PDF — 1-TOP-Z30A/500N (opens in a new tab) | PDF — 1-TOP-Z30A/5KN (opens in a new tab) | PDF — 1-TOP-Z4A/100KN (opens in a new tab) | PDF — 1-TOP-Z4A/200KN (opens in a new tab) | PDF — 1-TOP-Z4A/20KN (opens in a new tab) | PDF — 1-TOP-Z4A/500KN (opens in a new tab) | PDF — 1-TOP-Z4A/50KN (opens in a new tab) |
The industries we serve
Frequently asked questions
Answers to the most common questions about our products and services
It is a force reference transducer for calibration machines and comparisons between reference systems. Use an amplifier and load introduction hardware appropriate to the calibration.
The family covers nominal capacities from 100 N to 500 kN. Select a model covering the intended force points and the range on its calibration certificate.
HBK describes the family for compression and tension reference measurements. Choose the correct load introduction parts and confirm that the calibration certificate covers the required loading direction.
HBK lists manufacturer accuracy class 0.015 and ISO 376 class 00. Interpret each classification in its own context and check the calibrated force range and uncertainty on the certificate.
HBK offers calibration of the transducer, amplifier and fittings as a measurement chain. This documents the uncertainty of the combination used in practice.
Get a quote or advice
Tell us what you need and an engineer will come back to you.