PACEline CFT Force
Preloaded, calibrated piezoelectric force transducer for rapidly changing compression loads. Passive charge output for an external charge amplifier and IP65 protection.
Download the datasheet (opens in a new tab) This series on the HBK site (opens in a new tab)
Shared technical specifications for the series
Properties every model in the series has. What differs is in the models table below.
Range across models
The span covered by the models of the series together — not the range of each model.
| Force range | 0–20000 N |
|---|
Models in the series
One column per model: what differs between the models of the series.
| Parameter | 1-CFT/20KN | 1-CFT/5KN | PACEline CFT-20kN | PACEline CFT-5kN |
|---|---|---|---|---|
| Load mode | Compression only | Compression only | Compression only | Compression only |
| Protection class (DIN EN 60529) | IP65 | IP65 | IP65 | IP65 |
| Sampling rate reference | The selected HBK conditioner, filter and DAQ determine the digital sample rate. | The selected HBK conditioner, filter and DAQ determine the digital sample rate. | Charge-amplifier filter and output configuration determine the usable bandwidth; no unsupported digital rate is asserted | Charge-amplifier filter and output configuration determine the usable bandwidth; no unsupported digital rate is asserted |
| Sampling rate limited by system readout | True | True | Not specified | Not specified |
| Force range | 0–20000 N | 0–5000 N | 0–20000 N | 0–5000 N |
| Outputs and interfaces | Unknown | Unknown | Digital I/O | Digital I/O |
| Linearity reference | HBK accuracy class: 1; retained as a class, not converted to overall installed-chain accuracy. | HBK accuracy class: 1; retained as a class, not converted to overall installed-chain accuracy. | Not specified | Not specified |
| Technical specification details | Maximum capacity (nominal load): 20 kN; Height (without accessories): 0.551 in; Diameter (without cable or plug): 0.75 in | Maximum capacity (nominal load): 5 kN; Height (without accessories): 0.394 in; Diameter (without cable or plug): 0.512 in | 20 kN rated capacity = 20 kN (2.0394 t mass equivalent at standard gravity); compression | 5 kN rated capacity = 5 kN (509.8581 kg mass equivalent at standard gravity); compression |
| Repeatability reference | Use the individual calibration certificate and installed-chain verification; no unsupported scalar repeatability is inferred. | Use the individual calibration certificate and installed-chain verification; no unsupported scalar repeatability is inferred. | Not specified | Not specified |
| Accuracy class | 1% | 1% | 1% | 1% |
| Numeric manufacturer accuracy class | 1 | 1 | 1 | 1 |
| Accuracy (% FSO) | Not specified | Not specified | 1 % | 1 % |
| Interfaces | Not specified | Not specified | Ethernet | Ethernet |
| Status | Active | Active | Active | Active |
| Datasheet | PDF — 1-CFT/20KN (opens in a new tab) | PDF — 1-CFT/5KN (opens in a new tab) | PDF — PACEline CFT-20kN (opens in a new tab) | PDF — PACEline CFT-5kN (opens in a new tab) |
The industries we serve
Frequently asked questions
Answers to the most common questions about our products and services
CFT is a piezoelectric compression-force transducer. Gallium-phosphate elements produce a charge signal with force, rather than a strain-gauge bridge mV/V output.
Use a suitable charge cable and charge amplifier. The amplifier converts charge into voltage or a digital signal according to the acquisition system.
No. The manual distinguishes 5 kN and 20 kN nominal-force versions, with their own mechanical properties and force limits.
The manual lists connection cables as accessories outside standard delivery. Select length and connectors for the transducer and charge amplifier.
The manual lists a CSB4/1 summing box for parallel connection of up to four piezoelectric sensors to one charge amplifier. This produces a combined signal rather than four independent measurements.
Get a quote or advice
Tell us what you need and an engineer will come back to you.