PACEline CMC Force
Piezoelectric compression measurement chain with the sensor and charge amplifier calibrated together. Calibration ranges depend on capacity and configuration.
Download the datasheet (opens in a new tab) This series on the HBK site (opens in a new tab)
Shared technical specifications for the series
Properties every model in the series has. What differs is in the models table below.
| Load mode | Compression only |
|---|
Range across models
The span covered by the models of the series together — not the range of each model.
| Force range | 0–120000 N |
|---|
Models in the series
One column per model: what differs between the models of the series.
| Parameter | PACEline CMC | PACEline CMC-120kN | PACEline CMC-20kN | PACEline CMC-25kN | PACEline CMC-50kN | PACEline CMC-5kN | PACEline CMC-70kN |
|---|---|---|---|---|---|---|---|
| Outputs and interfaces | Unknown | Analog 0-10V | Analog 0-10V | Analog 0-10V | Analog 0-10V | Analog 0-10V | Analog 0-10V |
| Technical specification details | Configurable family; exact public ordering-code table not exposed on the current HBK page. | 120 kN rated capacity = 120 kN (12.2366 t mass equivalent at standard gravity); compression | 20 kN rated capacity = 20 kN (2.0394 t mass equivalent at standard gravity); compression | 25 kN rated capacity = 25 kN (2.5493 t mass equivalent at standard gravity); compression | 50 kN rated capacity = 50 kN (5.0986 t mass equivalent at standard gravity); compression | 5 kN rated capacity = 5 kN (509.8581 kg mass equivalent at standard gravity); compression | 70 kN rated capacity = 70 kN (7.138 t mass equivalent at standard gravity); compression |
| Force range | Not specified | 0–120000 N | 0–20000 N | 0–25000 N | 0–50000 N | 0–5000 N | 0–70000 N |
| Sampling rate reference | Not specified | The complete CMC chain defines the analog measurement bandwidth; downstream acquisition defines the digital rate | The complete CMC chain defines the analog measurement bandwidth; downstream acquisition defines the digital rate | The complete CMC chain defines the analog measurement bandwidth; downstream acquisition defines the digital rate | The complete CMC chain defines the analog measurement bandwidth; downstream acquisition defines the digital rate | The complete CMC chain defines the analog measurement bandwidth; downstream acquisition defines the digital rate | The complete CMC chain defines the analog measurement bandwidth; downstream acquisition defines the digital rate |
| Accuracy class | Not specified | 0.5% | 0.5% | 0.5% | 0.5% | 0.5% | 0.5% |
| Numeric manufacturer accuracy class | Not specified | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 |
| Status | Active | Active | Active | Active | Active | Active | Active |
| Datasheet | PDF — PACEline CMC (opens in a new tab) | PDF — PACEline CMC-120kN (opens in a new tab) | PDF — PACEline CMC-20kN (opens in a new tab) | PDF — PACEline CMC-25kN (opens in a new tab) | PDF — PACEline CMC-50kN (opens in a new tab) | PDF — PACEline CMC-5kN (opens in a new tab) | PDF — PACEline CMC-70kN (opens in a new tab) |
The industries we serve
Frequently asked questions
Answers to the most common questions about our products and services
CMC combines a piezoelectric force transducer, cable and charge amplifier. The manufacturer describes chain calibration from force in newtons to voltage, unlike three independently selected components without chain calibration.
The manufacturer specifies a second measurement range with fivefold amplification. This is an amplifier-range selection, not an increase in the head’s permissible force.
The amplifier table documents a ±10 V output. The head’s charge is processed by the amplifier, so acquisition must match the chain output.
No. The table specifies 10 kHz at −3 dB and 5 kHz at −1 dB. These are amplifier frequency-response properties; DAQ sampling rate is separate.
No. The datasheet specifies accuracy class 0.5 for the documented CMC chain. Replacing a cable or amplifier does not establish that the new combination retains its chain calibration and performance.
Get a quote or advice
Tell us what you need and an engineer will come back to you.