T40MAR Torque
Rotating torque flange for torque measurement in marine propulsion systems.
This series on the HBK site (opens in a new tab)
Models in the series
One column per model: what differs between the models of the series.
| Parameter | T40MAR | T40MAR-400kNm |
|---|---|---|
| Rotation | Rotating | Rotating |
| Mechanical connection | Flange | Flange |
| Sampling rate reference | Use the exact configured transducer and HBK interface datasheets. | TIM-EC bus cycle; transducer bandwidth and selected filters remain limiting factors |
| Repeatability reference | Family-level fallback: verify the ordered model and calibration certificate. | Not specified |
| Technical specification details | Configurable family; exact public ordering-code table not exposed on the current HBK page. | ±400 kNm rated torque; rotating installation; maximum 1,500 rpm |
| Outputs and interfaces | Unknown | Digital I/O |
| Sampling rate limited by system readout | False | Not specified |
| Rotational speed measurement | True | True |
| Linearity reference | Family-level fallback: no unsupported scalar accuracy is added. | Not specified |
| Torque range | Not specified | -400000–400000 Nm |
| Maximum rotational speed | Not specified | 1500 rpm |
| ADC sampling rate | Not specified | 1000 samples/s |
| Interfaces | Not specified | PROFINET |
| Accuracy (% FSO) | Not specified | 0.15 % |
| Accuracy class | Not specified | 0.15% |
| Numeric manufacturer accuracy class | Not specified | 0.15 |
| Status | Active | Active |
The industries we serve
Frequently asked questions
Answers to the most common questions about our products and services
Marine-drive torque, using a rotating flange transducer.
No. The brochure lists separate nominal ratings from 10 to 400 kN·m.
The official page describes T40MAR with MP60 electronics; check the certified system configuration.
Yes. Integrated speed measurement is listed.
The brochure classifies it as rotating, non-contact.
Get a quote or advice
Tell us what you need and an engineer will come back to you.