Skip to content

U2B-20kN

From the U2B series

Strain-gauge transducer for compression and tension, with an internal thread on one side and an external thread on the other. Rated IP67. Available with mV/V, voltage, current or IO-Link.

Force range
-20000–20000 N
Download the datasheet (opens in a new tab) Visit the HBK site (opens in a new tab)

Technical specification

Every engineering figure, laid out to scan quickly

Technical specification for U2B-20kN
Force range -20000–20000 N
Accuracy class ⁦0.1%⁩
Accuracy (% FSO) 0.2 %
Operating temperature -30–85 °C
Protection class (DIN EN 60529) IP67
Technical specification details 20 kN rated capacity = 20 kN (2.0394 t mass equivalent at standard gravity); compression and tension
ADC sampling rate 1111 samples/s
Ordering options and constraints K-U2B- — capacity: 500 N, 1 kN, 2 kN, 5 kN, 10 kN, 20 kN, 50 kN, 100 kN, 200 kN; output_signal: mV/V (passive strain gauge), Voltage (0…10V), Current (4-20mA), IO-Link; height_without_accessories: 2.83 in, 4.41 in, 5.55 in, 7.76 in, 9.13 in; diameter_without_cable_or_plug: 5.31495 in, 1.9685 in, 6.10235 in, 3.5433 in, 3.937 in; constraints: []
Load mode Compression and tension
Sampling rate reference 0.9 ms minimum IO-Link process-data cycle; the sensor electronics sample internally at 40 kHz

Values by configuration

These values differ with the controller or interface the sensor is used with. Each row applies to one configuration only; check the configuration in the system builder or with us.

Interfaces IO-Link
Interfaces PROFINET
Interfaces EtherCAT
Interfaces Ethernet
Request a quote for this product

The industries we serve

Get a quote or advice

Tell us what you need and an engineer will come back to you.

Request a quote for this product
What would you like to ask for?

Email or phone — one of them is enough

Email or phone — one of them is enough

0 of 500 words