U93A-50kN
From the U93A series
Flange-mounted strain-gauge transducer for dynamic compression and tension. The sensor body is rated IP68. Available with mV/V, voltage, current or IO-Link, depending on configuration.
- Force range
- -50000–50000 N
Technical specification
Every engineering figure, laid out to scan quickly
| Force range | -50000–50000 N |
|---|---|
| Accuracy class | 0.2% |
| Accuracy (% FSO) | 0.2 % |
| Protection class (DIN EN 60529) | IP68 |
| Technical specification details | 50 kN rated capacity = 50 kN (5.0986 t mass equivalent at standard gravity); compression and tension |
| ADC sampling rate | 1111 samples/s |
| Ordering options and constraints | K-U93A — capacity: 1 kN, 2 kN, 5 kN, 10 kN, 20 kN, 50 kN; output_signal: mV/V (passive strain gauge), Current (4-20mA), Voltage (0…10V), IO-Link; height_without_accessories: 1.89 in, 1.2 in; diameter_without_cable_or_plug: 1.65 in, 1.02 in; constraints: [] |
| Load mode | Compression and tension |
| Sampling rate reference | 0.9 ms minimum IO-Link process-data cycle; the sensor electronics sample internally at 40 kHz |
Values by configuration
These values differ with the controller or interface the sensor is used with. Each row applies to one configuration only; check the configuration in the system builder or with us.
| Interfaces | Ethernet |
|---|---|
| Interfaces | EtherCAT |
| Interfaces | PROFINET |
| Interfaces | IO-Link |
The industries we serve
Get a quote or advice
Tell us what you need and an engineer will come back to you.