Skip to content

U93A-5kN

From the U93A series

Flange-mounted strain-gauge transducer for dynamic compression and tension. The sensor body is rated IP68. Available with mV/V, voltage, current or IO-Link, depending on configuration.

Force range
-5000–5000 N
Download the datasheet (opens in a new tab) This series on the HBK site (opens in a new tab)

Technical specification

Every engineering figure, laid out to scan quickly

Technical specification for U93A-5kN
Force range -5000–5000 N
Accuracy class ⁦0.2%⁩
Accuracy (% FSO) 0.2 %
Protection class (DIN EN 60529) IP68
Technical specification details 5 kN rated capacity = 5 kN (509.8581 kg mass equivalent at standard gravity); compression and tension
ADC sampling rate 1111 samples/s
Ordering options and constraints K-U93A — capacity: 1 kN, 2 kN, 5 kN, 10 kN, 20 kN, 50 kN; output_signal: mV/V (passive strain gauge), Current (4-20mA), Voltage (0…10V), IO-Link; height_without_accessories: 1.89 in, 1.2 in; diameter_without_cable_or_plug: 1.65 in, 1.02 in; constraints: []
Load mode Compression and tension
Sampling rate reference 0.9 ms minimum IO-Link process-data cycle; the sensor electronics sample internally at 40 kHz

Values by configuration

These values differ with the controller or interface the sensor is used with. Each row applies to one configuration only; check the configuration in the system builder or with us.

Interfaces PROFINET
Interfaces Ethernet
Interfaces EtherCAT
Interfaces IO-Link
Request a quote for this product

The industries we serve

Get a quote or advice

Tell us what you need and an engineer will come back to you.

Request a quote for this product
What would you like to ask for?

Email or phone — one of them is enough

Email or phone — one of them is enough

0 of 500 words