Skip to content

ds821

ds821: sensors and measurement devices by Brüel & Kjær Vibro for vibration.

Visit the Brüel & Kjær Vibro site (opens in a new tab)

Models in the series

One column per model: what differs between the models of the series.

Models of ds821 compared by parameter
Parameter ds821 2 mm ECDS family ds821 4 mm ECDS family ds821 8 mm ECDS family
Frequency response 0–10 kHz 0–10 kHz 0–10 kHz
Status Active Active Active
Datasheet PDF — ds821 2 mm ECDS family (opens in a new tab) PDF — ds821 4 mm ECDS family (opens in a new tab) PDF — ds821 8 mm ECDS family (opens in a new tab)

The industries we serve

Frequently asked questions

Answers to the most common questions about our products and services

It uses eddy currents to measure the gap from the probe tip to a conductive target. A typical application is measuring shaft motion relative to the probe mounting point.

ds821 is the standard series. For a classified area, consider ds822 and verify that the exact configuration meets the site's requirements.

The chain uses a probe with an integral cable, a driver, and an extension cable where required. Match the components by the documented measuring range and total system length.

These are nominal lengths for the documented cable configuration between probe and driver. Displacement span is a separate specification measured in millimetres.

The manufacturer offers forward- and reverse-mounting probes. Choose according to bracket access, insertion direction and the required gap to the target.

Didn't find the answer you were looking for?

Talk to an expert

More information

Get a quote or advice

Tell us what you need and an engineer will come back to you.

Request a quote for this product
What would you like to ask for?

Email or phone — one of them is enough

Email or phone — one of them is enough

0 of 500 words