ds822
ds822: sensors and measurement devices by Brüel & Kjær Vibro for vibration.
Visit the Brüel & Kjær Vibro site (opens in a new tab)
Models in the series
One column per model: what differs between the models of the series.
| Parameter | ds822 2 mm ECDS family | ds822 4 mm ECDS family |
|---|---|---|
| Frequency response | 0–10 kHz | 0–10 kHz |
| Status | Active | Active |
| Datasheet | PDF — ds822 2 mm ECDS family (opens in a new tab) | PDF — ds822 4 mm ECDS family (opens in a new tab) |
The industries we serve
Frequently asked questions
Answers to the most common questions about our products and services
ds822 is the ATEX series in the ds82x non-contact displacement family. Verify the marking, area classification and connection conditions of the ordered configuration for its installation location.
The manufacturer specifies a dedicated driver for each series and measuring range. Select the probe, driver and cable from a documented ds822 configuration and check its approval documentation.
Yes. The probe induces eddy currents in the target surface. Target material and geometry affect calibration, so match the measurement conditions to the actual shaft.
The eddy-current driver provides a voltage signal that changes with the target gap. Configure the monitoring input range and scale for the selected probe and driver.
The manufacturer uses an mc code for a complete system and separate codes for the probe, extension cable and driver. Check that the full order code specifies the required range, mounting version and system length.
Get a quote or advice
Tell us what you need and an engineer will come back to you.