FS65HSA
FS65HSA uses two FBGs to measure low-level vibration in large structures. Its measurement band is 0.1–75 Hz, with amplitude accuracy depending on the frequency band used. System resolution depends on the optical interrogator and processing configuration.
Visit the HBK site (opens in a new tab)
Models in the series
One column per model: what differs between the models of the series.
| Parameter | 1-FS65HSA-02/2510 | 1-FS65HSA-02/2525 | 1-FS65HSA-02/2540 | 1-FS65HSA-02/2555 | 1-FS65HSA-02/2570 | 1-FS65HSA-02/2585 | 1-FS65HSA-05/2510 | 1-FS65HSA-05/2530 | 1-FS65HSA-05/2550 | 1-FS65HSA-05/2570 | K-FS65HSA |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Number of measurement channels | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
| Technical specification details | ±2 g indexed capacity; Uniaxial; General purpose; Center bolt mounting | ±2 g indexed capacity; Uniaxial; General purpose; Center bolt mounting | ±2 g indexed capacity; Uniaxial; General purpose; Center bolt mounting | ±2 g indexed capacity; Uniaxial; General purpose; Center bolt mounting | ±2 g indexed capacity; Uniaxial; General purpose; Center bolt mounting | ±2 g indexed capacity; Uniaxial; General purpose; Center bolt mounting | ±5 g indexed capacity; Uniaxial; General purpose; Center bolt mounting | ±5 g indexed capacity; Uniaxial; General purpose; Center bolt mounting | ±5 g indexed capacity; Uniaxial; General purpose; Center bolt mounting | ±5 g indexed capacity; Uniaxial; General purpose; Center bolt mounting | ±5 g indexed capacity; Uniaxial; General purpose; Center bolt mounting |
| Outputs and interfaces | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown |
| Number of axes | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
| Frequency response | 0–300 Hz | 0–300 Hz | 0–300 Hz | 0–300 Hz | 0–300 Hz | 0–300 Hz | 0–300 Hz | 0–300 Hz | 0–300 Hz | 0–300 Hz | 0–300 Hz |
| Operating temperature | -23–85 °C | -23–85 °C | -23–85 °C | -23–85 °C | -23–85 °C | -23–85 °C | -23–85 °C | -23–85 °C | -23–85 °C | -23–85 °C | -23–85 °C |
| Acceleration sensitivity | 1300 mV/g | 1300 mV/g | 1300 mV/g | 1300 mV/g | 1300 mV/g | 1300 mV/g | 1300 mV/g | 1300 mV/g | 1300 mV/g | 1300 mV/g | 1300 mV/g |
| Status | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active |
The industries we serve
Frequently asked questions
Answers to the most common questions about our products and services
It is designed to monitor weak, low-frequency vibrations, such as ambient vibration in large structures.
The datasheet lists ±2 g and ±5 g variants. Choose based on the highest acceleration amplitude expected in the measurement.
The datasheet specifies 3% accuracy over 0.1–50 Hz and 10% over 0.1–75 Hz. The figure for 0.1–25 Hz is 2%.
Typical values are 650 pm/g per grating and 1,300 pm/g for the combined signal from both gratings. Configure calibration for the signal being processed.
The sensor is rated IP68. HBK states that the datasheet test was immersion at one metre for 24 hours.
Get a quote or advice
Tell us what you need and an engineer will come back to you.