Skip to content

TYPE 4370

HBK’s Type 4370 is a uniaxial accelerometer for vibration measurements. Its charge output has a nominal sensitivity of 98 pC/g. The top connector and stud mounting use 10‑32 UNF. Select the charge amplifier and mounting arrangement to suit the acceleration level, frequency and test surface.

Visit the HBK site (opens in a new tab)

Models in the series

One column per model: what differs between the models of the series.

Models of TYPE 4370 compared by parameter
Parameter -4370— -4370--- -4370-V– -4370-V--
Frequency response 0–5000 kHz 0–5000 kHz
Vibration sensor output Piezoelectric charge; Analogue Piezoelectric charge; Analogue
Sampling rate reference Sensor bandwidth is indexed by HBK; the selected conditioner and DAQ determine digital sample rate. Sensor bandwidth is indexed by HBK; the selected conditioner and DAQ determine digital sample rate.
Technical specification details ±2000 g indexed capacity; Uniaxial; General purpose; Stud mounting ±2000 g indexed capacity; Uniaxial; General purpose; Stud mounting
Linearity reference Official indexed sensitivity tolerance: 2%. Official indexed sensitivity tolerance: 15%.
Static (DC) acceleration measurement False False
Operating temperature -74–288 °C -74–288 °C
Acceleration sensitivity 98 mV/g 98 mV/g
Number of measurement channels 1 1
Repeatability reference HBK does not publish a separate scalar repeatability for every ordering code; use individual calibration and controlled mounting. HBK does not publish a separate scalar repeatability for every ordering code; use individual calibration and controlled mounting.
Outputs and interfaces Unknown Unknown
Sampling rate limited by system readout True True
Number of axes 1 1
Status Active Active

The industries we serve

Frequently asked questions

Answers to the most common questions about our products and services

It is a piezoelectric accelerometer with a charge output. Use a compatible charge input or charge amplifier.

HBK lists a nominal sensitivity of 98 pC/g. Set the measurement channel using the sensitivity on the individual sensor’s calibration certificate.

The manufacturer specifies 10‑32 UNF stud mounting. Align the measurement axis with the acceleration of interest and verify the mounting surface.

HBK lists an upper frequency of 4.8 kHz. Check the frequency-response conditions and how mounting and the measurement chain affect the usable band.

The transducer measures acceleration along a single axis. For multiple directions, use several appropriately oriented sensors or a multi-axis accelerometer.

Didn't find the answer you were looking for?

Talk to an expert

More information

Get a quote or advice

Tell us what you need and an engineer will come back to you.

Request a quote for this product
What would you like to ask for?

Email or phone — one of them is enough

Email or phone — one of them is enough

0 of 500 words