TYPE 4381
HBK’s Type 4381 is a uniaxial charge accelerometer with a side connector. HBK positions it for general-purpose vibration measurements, including lower frequencies, within a band extending to 4.8 kHz. Its nominal sensitivity is 98 pC/g. Use a suitable charge amplifier and configure the channel for the individual calibration and mounting arrangement.
Visit the HBK site (opens in a new tab)
Models in the series
One column per model: what differs between the models of the series.
| Parameter | -4381— -4381--- | -4381-V– -4381-V-- |
|---|---|---|
| Outputs and interfaces | Unknown | Unknown |
| Number of measurement channels | 1 | 1 |
| Frequency response | 0–5000 kHz | 0–5000 kHz |
| Technical specification details | ±2000 g indexed capacity; Uniaxial; General purpose; Stud mounting | ±2000 g indexed capacity; Uniaxial; General purpose; Stud mounting |
| Operating temperature | -74–288 °C | -74–288 °C |
| Number of axes | 1 | 1 |
| Acceleration sensitivity | 98 mV/g | 98 mV/g |
| Status | Active | Active |
The industries we serve
Frequently asked questions
Answers to the most common questions about our products and services
HBK lists 0.1 Hz to 4.8 kHz. The usable system bandwidth also depends on mounting and the readout chain.
The nominal sensitivity is 98 pC/g. Use the individual sensor’s calibration value when setting up the measurement channel.
The connector is on the side. Allow clearance for the connector and route the cable so it does not load the sensor.
The sensor provides a charge signal. Use a direct charge input or a compatible charge amplifier with a range suitable for the expected acceleration.
HBK positions it for general-purpose vibration measurements, including lower frequencies, within a band extending to 4.8 kHz. Check that the test frequencies and connector clearance suit the installation.
Get a quote or advice
Tell us what you need and an engineer will come back to you.