Skip to content

TYPE 4383

Type 4383 supports general vibration testing, including low-level measurements. Its side connector lets the cable run parallel to the mounting surface where overhead space is limited. The sensor uses threaded mounting and a charge acquisition channel.

Visit the HBK site (opens in a new tab)

Models in the series

One column per model: what differs between the models of the series.

Models of TYPE 4383 compared by parameter
Parameter -4383— -4383--- -4383-V– -4383-V--
Outputs and interfaces Unknown Unknown
Technical specification details ±2000 g indexed capacity; Uniaxial; General purpose; Stud mounting ±2000 g indexed capacity; Uniaxial; General purpose; Stud mounting
Number of axes 1 1
Operating temperature -74–288 °C -74–288 °C
Frequency response 0–10 kHz 0–10 kHz
Number of measurement channels 1 1
Acceleration sensitivity 31 mV/g 31 mV/g
Status Active Active

The industries we serve

Frequently asked questions

Answers to the most common questions about our products and services

The cable exits sideways so it can be routed along the mounting surface. Check the model drawing for the required connector and cable bend clearance.

Both have nominal charge sensitivity of 31 pC/g and a 0.1 Hz to 8.4 kHz band at the ±10% limit. The 4383 connector is on the side and the 4382 connector is on top.

The datasheet lists a 2,000 g peak for continuous sinusoidal acceleration. Check separate limits for short shocks and alternate mounting methods.

The base has a 10–32 UNF-2B mounting thread for a matching stud. Route the side cable with access to the connection and without pulling on it.

The sensitivity on the calibration chart is measured at 159.2 Hz. For accuracy over a wide band, also consult the frequency-response curve.

Didn't find the answer you were looking for?

Talk to an expert

More information

Get a quote or advice

Tell us what you need and an engineer will come back to you.

Request a quote for this product
What would you like to ask for?

Email or phone — one of them is enough

Email or phone — one of them is enough

0 of 500 words