TYPE 4384
Type 4384 supports high-frequency vibration measurements where a cable can exit above the sensor. Its titanium housing mounts with a stud, and nominal charge sensitivity is 9.8 pC/g. When choosing a setup, consider both frequency limits and mounting method.
Visit the HBK site (opens in a new tab)
Models in the series
One column per model: what differs between the models of the series.
| Parameter | -4384— -4384--- | -4384-V– -4384-V-- |
|---|---|---|
| Frequency response | 0–16000 kHz | 0–16000 kHz |
| Outputs and interfaces | Unknown | Unknown |
| Acceleration sensitivity | 9.8 mV/g | 9.8 mV/g |
| Number of axes | 1 | 1 |
| Operating temperature | -74–288 °C | -74–288 °C |
| Technical specification details | ±6000 g indexed capacity; Uniaxial; General purpose; Stud mounting | ±6000 g indexed capacity; Uniaxial; General purpose; Stud mounting |
| Number of measurement channels | 1 | 1 |
| Status | Active | Active |
The industries we serve
Frequently asked questions
Answers to the most common questions about our products and services
The specified measurement band is 0.1 Hz to 12.6 kHz at the ±10% limit. Mounted resonance is 42 kHz.
The datasheet lists up to 6,000 g peak for continuous sinusoidal acceleration. Select the mounting method and charge input range for the test as well.
The top has a 10–32 UNF-2A coaxial connector. The base has a 10–32 UNF-2B thread for the mounting stud.
Both are nominally 9.8 pC/g at 159.2 Hz. Sensitivity tolerance is ±2% for 4384 and ±15% for 4384-V.
Both are specified up to 12.6 kHz at the ±10% limit. Choose 4384 for a cable that exits above the sensor and 4371 for a side connection.
Get a quote or advice
Tell us what you need and an engineer will come back to you.