Skip to content

TYPE 4391

Type 4391 suits vibration and shock measurements that need isolation between the mounting base and signal ground. The sensor mounts with a stud and connects to charge acquisition via its TNC connector. Nominal charge sensitivity is 9.8 pC/g.

Visit the HBK site (opens in a new tab)

Models in the series

One column per model: what differs between the models of the series.

Models of TYPE 4391 compared by parameter
Parameter -4391— -4391--- -4391-V– -4391-V--
Number of axes 1 1
Frequency response 0–10 kHz 0–10 kHz
Acceleration sensitivity 9.8 mV/g 9.8 mV/g
Operating temperature -60–200 °C -60–200 °C
Outputs and interfaces Unknown Unknown
Number of measurement channels 1 1
Technical specification details ±2000 g indexed capacity; Uniaxial; Industrial; Stud mounting ±2000 g indexed capacity; Uniaxial; Industrial; Stud mounting
Status Active Active

The industries we serve

Frequently asked questions

Answers to the most common questions about our products and services

The base isolates the mounting surface from signal ground. The datasheet specifies over 100 MΩ of insulation resistance, which can help reduce ground-loop noise.

The electrical output is a top TNC connector. The mounting interface is a 10–32 UNF-2B thread in the base.

The dedicated datasheet specifies 0.1 Hz to 10 kHz at the ±10% amplitude limit. In use, mounting and the acquisition chain also affect the usable band.

The sensor is rated for −60°C to +180°C. Check the temperature rating of the particular TNC cable, which varies by cable model.

Both are nominally 9.8 pC/g at 159.2 Hz. Sensitivity tolerance is ±2% for 4391 and ±15% for 4391-V.

Didn't find the answer you were looking for?

Talk to an expert

More information

Get a quote or advice

Tell us what you need and an engineer will come back to you.

Request a quote for this product
What would you like to ask for?

Email or phone — one of them is enough

Email or phone — one of them is enough

0 of 500 words