TYPE 4393
Type 4393 is designed for shock and high-frequency vibration measurements on light components. The side socket allows the cable to be detached separately from the sensor. Stud mounting secures the sensor directly to the part in accordance with the mounting drawing.
Visit the HBK site (opens in a new tab)
Models in the series
One column per model: what differs between the models of the series.
| Parameter | -4393— -4393--- | -4393-V– -4393-V-- |
|---|---|---|
| Outputs and interfaces | Unknown | Unknown |
| Frequency response | 0–60000 kHz | 0–60000 kHz |
| Number of axes | 1 | 1 |
| Acceleration sensitivity | 3.1 mV/g | 3.1 mV/g |
| Technical specification details | ±5000 g indexed capacity; Uniaxial; Miniature/ESS; Stud mounting | ±5000 g indexed capacity; Uniaxial; Miniature/ESS; Stud mounting |
| Operating temperature | -74–288 °C | -74–288 °C |
| Number of measurement channels | 1 | 1 |
| Status | Active | Active |
The industries we serve
Frequently asked questions
Answers to the most common questions about our products and services
Yes. The 4393 has a side M3 coaxial connection for a detachable cable. Choose a low-noise charge cable with an M3 connection at the sensor end.
The specified band is 0.1 Hz to 16.5 kHz at the ±10% amplitude limit. On a light part, account for the effect of the sensor and cable on the measured response.
The base has an M3 thread for stud mounting. If the test part cannot be threaded directly, choose a compatible mounting adapter and check its effect on frequency response.
Nominal charge sensitivity is 3.10 pC/g. Use the individual calibration value, especially for the 4393-V version with its ±15% sensitivity tolerance.
Type 4393 has a charge output specified in pC/g. The 4397-A has a built-in CCLD preamplifier and voltage output, and needs an IEPE input or a constant-current conditioner.
Get a quote or advice
Tell us what you need and an engineer will come back to you.