IFD2411-3
From the confocalDT IFD2411 series
Factory-calibrated confocal channel for series production, with a separate head and controller linked by optical fiber. The measuring rate is adjustable up to 8 kHz.
- Number of measurement channels
- 1
Technical specification
Every engineering figure, laid out to scan quickly
| Measuring range | 3 mm |
|---|---|
| Linearity | 1.5 µm |
| Measuring rate | 8 kHz |
| Number of measurement channels | 1 |
| Accuracy | 1.5 µm |
| Contact | Non-contact |
Compatible accessories
Power supplies
Complementary products
The industries we serve
Frequently asked questions
Answers to the most common questions about our products and services
The measuring span is 3 mm and starts approximately 25 mm from the sensor face. Position the target so that the expected motion stays within the window.
The datasheet specifies less than 125 nm RMS noise at mid-span at a 1 kHz measuring rate. This value describes noise under the specified test conditions.
The channel is a factory-calibrated combination of a separate head and controller connected by optical fiber. The measuring rate is adjustable from 100 Hz to 8 kHz.
Get a quote or advice
Tell us what you need and an engineer will come back to you.


