DT3301
From the eddyNCDT controller components series
eddyNCDT controller components: measurement controllers by Micro-Epsilon for inductive (eddy current).
- Number of measurement channels
- 1
Technical specification
Every engineering figure, laid out to scan quickly
| Linearity (% FSO) | < ±0.2 % FSO |
|---|---|
| Supply voltage | 11 V / 32 V |
| Current consumption | 700 mA |
| Number of measurement channels | 1 |
| Operating temperature | 5 °C / 50 °C |
| Protection class (DIN EN 60529) | IP64 |
| Selectable frequency response | 25 Hz; 2.5 kHz; 25 kHz; 100 kHz only for measuring span ≤1 mm |
| Static resolution (% FSO) | 0.005 % FSO (peak-to-peak; 25 Hz) |
| Dynamic resolution (% FSO) | 0.2 % FSO (peak-to-peak) |
| Adaptation board required | Yes |
| Number of characteristic curves | 3 |
| Calibration after configuration changes | Yes |
Values by configuration
These values differ with the controller or interface the sensor is used with. Each row applies to one configuration only; check the configuration in the system builder or with us.
| Resolution (% FSO) | 0.005 % |
|---|---|
| Resolution (% FSO) | 0.2 % |
The industries we serve
Get a quote or advice
Tell us what you need and an engineer will come back to you.