DT3020
From the eddyNCDT DT3020 controller series
eddyNCDT DT3020 controller: measurement controllers by Micro-Epsilon for inductive (eddy current).
- Frequency response
- 10–5000 Hz
Technical specification
Every engineering figure, laid out to scan quickly
| Linearity (% FSO) | < ±0.2 % FSO; matched sensor/controller, 3-/5-point linearization |
|---|---|
| Supply voltage | 12 V / 32 V |
| Interfaces | RS-485 |
| Storage temperature | -20 °C / 105 °C |
| Operating temperature | -20–105 °C |
| Protection class (DIN EN 60529) | IP67 |
| Frequency response | 10–5000 Hz |
| Controller temperature stability (% FSO/K) | < 0.025 % FSO/K (midrange; compensated temperature range) |
| Measuring rate, analog output | 80 kHz |
| Measuring rate, digital interface | 10 kHz |
| Static resolution (% FSO) | 0.004 % FSO (RMS; reference: midrange; 20 Hz) |
| Dynamic resolution (% FSO) | 0.01 % FSO (RMS; reference: midrange; 5 kHz) |
| Frequency response cutoff Maximum rate with a compatible controller | 5 kHz |
| Channels | 1 |
| Interfaces via separate adapter | usb / ethernet / ethercat / profinet / ethernet_ip |
| Temperature compensation | 10 °C / 105 °C |
| Maximum current-output load | 500 Ω |
| Switching output modes | NPN / PNP / push-pull |
| Number of characteristic curves | 1 |
| Weight | approx. 190 g |
Values by configuration
These values differ with the controller or interface the sensor is used with. Each row applies to one configuration only; check the configuration in the system builder or with us.
| Dimension (drawing reference) | 53 mm |
|---|---|
| Dimension (drawing reference) | 76 mm |
| Dimension (drawing reference) | 102 mm |
| Dimension (drawing reference) | 30 mm |
| Resolution (% FSO) | 0.004 % |
| Resolution (% FSO) | 0.01 % |
The industries we serve
Get a quote or advice
Tell us what you need and an engineer will come back to you.