IFS2402-1.5
From the IFS2402 series
4 mm confocal heads for distance and displacement measurement in bores and confined spaces. Axial and radial beam versions are available.
- Number of measurement channels
- 2
Technical specification
Every engineering figure, laid out to scan quickly
| Measuring range | 1.5 mm |
|---|---|
| Start of measuring range | 0.9 mm |
| Linearity | 0.6 µm |
| Light spot diameter | 0.02 mm |
| Maximum measuring angle | 5 deg |
| Numerical aperture (NA) | 0.2 |
| Storage temperature | -20–70 °C |
| Operating temperature | 5–70 °C |
| Weight | 0.186 kg |
| Mounting | Radial clamping (mounting adapter see accessories) |
| Technical specification details | 1.5 mm net measuring range |
| Accuracy | 0.45 µm |
| Target material | reflective, diffuse as well as transparent surfaces (e.g. glass) |
| Measurement restrictions | Page 16 footnote 6: no thickness measurement; distance measurement on glass requires glass thickness greater than the measuring range; metal measurement is possible only to a limited extent. |
| Linearity reference | https://www.micro-epsilon.com/fileadmin/download/products/cat--confocalDT--en-us.pdf published optical-probe linearity; axial resolution is not substituted for linearity. |
| Contact | Non-contact |
Values by configuration
These values differ with the controller or interface the sensor is used with. Each row applies to one configuration only; check the configuration in the system builder or with us.
| Interfaces | EtherCAT |
|---|---|
| Interfaces | Ethernet |
| Interfaces | PROFINET |
| Number of measurement channels | 2 |
| Number of measurement channels | 1 |
| Outputs and interfaces | RS422 / RS485 |
| Outputs and interfaces | 4-20mA |
| Outputs and interfaces | Digital I/O |
| Outputs and interfaces | Analog 0-10V |
| Protection class (DIN EN 60529) | IP64 |
| Protection class (DIN EN 60529) | IP40 |
| Resolution | 0.192 µm |
| Resolution | 0.03 µm |
| Sampling rate reference | IFC2466MP: 30,000 measurements/s per synchronous channel |
| Sampling rate reference | IFC2421: 10,000 measurements/s |
| Sampling rate reference | IFC2417: 25,000 measurements/s per synchronous channel |
| Sampling rate reference | IFC2422MP: 10,000 measurements/s per synchronous channel |
| Sampling rate reference | IFC2411: 8,000 measurements/s |
| Sampling rate reference | IFC2412: 8,000 measurements/s per synchronous channel |
| Sampling rate reference | IFC2421MP: 10,000 measurements/s |
| Sampling rate reference | IFC2416: 25,000 measurements/s |
| Sampling rate reference | IFC2466: 30,000 measurements/s per synchronous channel |
| Sampling rate reference | IFC2422: 10,000 measurements/s per synchronous channel |
| Sampling rate reference | IFC2465: 30,000 measurements/s |
| Sampling rate reference | IFC2465MP: 30,000 measurements/s |
Compatible system components
Controllers
-
IFC2411
Required
- Measuring rate
- 8 kHz
- Communication
- Ethernet, RS422
- Inputs
- 1
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2411/IE
Required
- Measuring rate
- 8 kHz
- Communication
- RS422, PROFINET, EtherNet/IP, EtherCAT
- Inputs
- 1
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2412
Required
- Measuring rate
- 8 kHz
- Communication
- RS422, Ethernet
- Inputs
- 2
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2412/IE
Required
- Measuring rate
- 8 kHz
- Communication
- EtherCAT, RS422
- Inputs
- 2
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2416
Required
- Measuring rate
- 25 kHz
- Communication
- Ethernet, RS422
- Inputs
- 1
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2417
Required
- Measuring rate
- 25 kHz
- Communication
- RS422, Ethernet
- Inputs
- 2
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2417/IE
Required
- Measuring rate
- 25 kHz
- Communication
- EtherCAT, RS422
- Inputs
- 2
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2421
Required
- Measuring rate
- 10 kHz
- Communication
- Ethernet, RS422, EtherCAT
- Inputs
- 1
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2421MP
Required
- Measuring rate
- 10 kHz
- Communication
- EtherCAT, Ethernet, RS422
- Inputs
- 1
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2422
Required
- Measuring rate
- 10 kHz
- Communication
- EtherCAT, Ethernet, RS422
- Inputs
- 2
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2422MP
Required
- Measuring rate
- 10 kHz
- Communication
- Ethernet, EtherCAT, RS422
- Inputs
- 2
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2465
Required
- Measuring rate
- 30 kHz
- Communication
- Ethernet, EtherCAT, RS422
- Inputs
- 1
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2465MP
Required
- Measuring rate
- 30 kHz
- Communication
- EtherCAT, RS422, Ethernet
- Inputs
- 1
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2466
Required
- Measuring rate
- 30 kHz
- Communication
- EtherCAT, Ethernet, RS422
- Inputs
- 2
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2466MP
Required
- Measuring rate
- 30 kHz
- Communication
- RS422, Ethernet, EtherCAT
- Inputs
- 2
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
Compatible accessories
Optical fibres
Power supplies
-
PS2020 (2420062)
Optional
Mounting
-
MA2402
Optional
Accessories
-
C2402/Vac/KF16
Optional
-
C2405/Vac/1/KF16
Optional
-
C2405/Vac/1/CF16
Optional
-
C2405/Vac/6/CF63
Optional
Complementary products
-
IF1032/ETH
Optional
-
IF2001/USB
Optional
-
IF2004/USB
Optional
-
IF2008/PCIE
Optional
-
IF2008/ETH
Optional
-
IFL2422/LED
Optional
- IFL24x1/LED configurable component family Optional Only for source configuration configuration-298a8d81973ad7fd552da028: IFS2402-1.5; selected configuration must be matched before display.
Cables
-
SC2415-x/IF2008
Optional
-
SC2415-x/IF2008ETH
Optional
-
SC2415-x/OE
Optional
-
SC2471-x/IF2008
Optional
-
SC2471-3/IF2008ETH
Optional
-
SC2471-x/RS422/OE
Optional
The industries we serve
Frequently asked questions
Answers to the most common questions about our products and services
The measuring span is 1.5 mm and starts approximately 0.9 mm from the sensor face. Position the target so that the expected motion stays within the window.
The datasheet specifies less than 192 nm RMS noise at mid-span at a 1 kHz measuring rate. This value describes noise under the specified test conditions.
The head is 4 mm in diameter and has a 2 m attached fiber with an E2000/APC connector. The beam travels along the sensor axis.
Get a quote or advice
Tell us what you need and an engineer will come back to you.


