IFS2405-0.3
From the IFS2405 series
Confocal heads for distance and one-sided transparent thickness measurement across a choice of spans. Dedicated vacuum versions are available.
- Number of measurement channels
- 1
Technical specification
Every engineering figure, laid out to scan quickly
| Measuring range | 0.3 mm |
|---|---|
| Start of measuring range | 6 mm |
| Linearity | 0.09 µm |
| Light spot diameter | 0.006 mm |
| Maximum measuring angle | 34 deg |
| Numerical aperture (NA) | 0.6 |
| Storage temperature | -20–70 °C |
| Operating temperature | 5–70 °C |
| Weight | 0.14 kg |
| Mounting | Radial clamping (mounting adapter see accessories) |
| Technical specification details | 0.3 mm net measuring range |
| Minimum target thickness | 0.015 mm |
| Target material | reflective, diffuse as well as transparent surfaces (e.g. glass) |
| Linearity reference | https://www.micro-epsilon.com/fileadmin/download/products/cat--confocalDT--en-us.pdf published optical-probe linearity; axial resolution is not substituted for linearity. |
| Contact | Non-contact |
Values by configuration
These values differ with the controller or interface the sensor is used with. Each row applies to one configuration only; check the configuration in the system builder or with us.
| Interfaces | EtherCAT |
|---|---|
| Interfaces | Ethernet |
| Interfaces | PROFINET |
| Number of measurement channels | 1 |
| Number of measurement channels | 2 |
| Outputs and interfaces | RS422 / RS485 |
| Outputs and interfaces | Analog 0-10V |
| Outputs and interfaces | 4-20mA |
| Outputs and interfaces | Digital I/O |
| Protection class (DIN EN 60529) | IP40 |
| Protection class (DIN EN 60529) | IP64 |
| Resolution | 0.018 µm |
| Resolution | 0.002 µm |
| Sampling rate reference | IFC2421: 10,000 measurements/s |
| Sampling rate reference | IFC2411: 8,000 measurements/s |
| Sampling rate reference | IFC2466: 30,000 measurements/s per synchronous channel |
| Sampling rate reference | IFC2466MP: 30,000 measurements/s per synchronous channel |
| Sampling rate reference | IFC2416: 25,000 measurements/s |
| Sampling rate reference | IFC2422MP: 10,000 measurements/s per synchronous channel |
| Sampling rate reference | IFC2417: 25,000 measurements/s per synchronous channel |
| Sampling rate reference | IFC2422: 10,000 measurements/s per synchronous channel |
| Sampling rate reference | IFC2465MP: 30,000 measurements/s |
| Sampling rate reference | IFC2465: 30,000 measurements/s |
| Sampling rate reference | IFC2412: 8,000 measurements/s per synchronous channel |
| Sampling rate reference | IFC2421MP: 10,000 measurements/s |
Compatible system components
Controllers
-
IFC2411
Required
- Measuring rate
- 8 kHz
- Communication
- Ethernet, RS422
- Inputs
- 1
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2411/IE
Required
- Measuring rate
- 8 kHz
- Communication
- RS422, PROFINET, EtherNet/IP, EtherCAT
- Inputs
- 1
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2412
Required
- Measuring rate
- 8 kHz
- Communication
- RS422, Ethernet
- Inputs
- 2
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2412/IE
Required
- Measuring rate
- 8 kHz
- Communication
- EtherCAT, RS422
- Inputs
- 2
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2416
Required
- Measuring rate
- 25 kHz
- Communication
- Ethernet, RS422
- Inputs
- 1
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2417
Required
- Measuring rate
- 25 kHz
- Communication
- RS422, Ethernet
- Inputs
- 2
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2417/IE
Required
- Measuring rate
- 25 kHz
- Communication
- EtherCAT, RS422
- Inputs
- 2
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2421
Required
- Measuring rate
- 10 kHz
- Communication
- Ethernet, RS422, EtherCAT
- Inputs
- 1
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2421MP
Required
- Measuring rate
- 10 kHz
- Communication
- EtherCAT, Ethernet, RS422
- Inputs
- 1
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2422
Required
- Measuring rate
- 10 kHz
- Communication
- EtherCAT, Ethernet, RS422
- Inputs
- 2
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2422MP
Required
- Measuring rate
- 10 kHz
- Communication
- Ethernet, EtherCAT, RS422
- Inputs
- 2
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2465
Required
- Measuring rate
- 30 kHz
- Communication
- Ethernet, EtherCAT, RS422
- Inputs
- 1
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2465MP
Required
- Measuring rate
- 30 kHz
- Communication
- EtherCAT, RS422, Ethernet
- Inputs
- 1
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2466
Required
- Measuring rate
- 30 kHz
- Communication
- EtherCAT, Ethernet, RS422
- Inputs
- 2
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2466MP
Required
- Measuring rate
- 30 kHz
- Communication
- RS422, Ethernet, EtherCAT
- Inputs
- 2
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
Compatible accessories
Optical fibres
-
C2401-3
Required with the chosen components
Standard optical fiber; length 3 m; FC/APC and E2000/APC connectors. For IFS2405-0.3.
-
C2401/PT3-3
Required with the chosen components
Optical fiber with protective hose for mechanical stress; length 3 m; FC/APC and E2000/APC connectors. For IFS2405-0.3.
-
C2401-3(10)
Required with the chosen components
Drag-chain compatible optical fiber; length 3 m; FC/APC and E2000/APC connectors. For IFS2405-0.3.
-
C2401-3(20)
Required with the chosen components
Robot-compatible optical fiber; length 3 m; FC/APC and E2000/APC connectors. For IFS2405-0.3.
-
C2400-x
Required with the chosen components
-
C2400/PT-x
Required with the chosen components
-
C2400/PT-x-Vac
Required with the chosen components
-
C2401-5
Required with the chosen components
Standard optical fiber; length 5 m; FC/APC and E2000/APC connectors. For IFS2405-0.3.
-
C2401-10
Required with the chosen components
Standard optical fiber; length 10 m; FC/APC and E2000/APC connectors. For IFS2405-0.3.
-
C2401/PT3-5
Required with the chosen components
Optical fiber with protective hose for mechanical stress; length 5 m; FC/APC and E2000/APC connectors. For IFS2405-0.3.
-
C2401/PT3-10
Required with the chosen components
Optical fiber with protective hose for mechanical stress; length 10 m; FC/APC and E2000/APC connectors. For IFS2405-0.3.
-
C2401-5(10)
Required with the chosen components
Drag-chain compatible optical fiber; length 5 m; FC/APC and E2000/APC connectors. For IFS2405-0.3.
-
C2401-10(10)
Required with the chosen components
Drag-chain compatible optical fiber; length 10 m; FC/APC and E2000/APC connectors. For IFS2405-0.3.
-
C2401-5(20)
Required with the chosen components
Robot-compatible optical fiber; length 5 m; FC/APC and E2000/APC connectors. For IFS2405-0.3.
-
C2401-10(20)
Required with the chosen components
Robot-compatible optical fiber; length 10 m; FC/APC and E2000/APC connectors. For IFS2405-0.3.
Power supplies
-
PS2020 (2420062)
Optional
Mounting
-
MA2400-27
Optional
-
JMA-27
Optional
-
JMA-Thickness-27
Optional
Accessories
-
C2402/Vac/KF16
Optional
-
C2405/Vac/1/KF16
Optional
-
C2405/Vac/1/CF16
Optional
-
C2405/Vac/6/CF63
Optional
Complementary products
-
IF1032/ETH
Optional
-
IF2001/USB
Optional
-
IF2004/USB
Optional
-
IF2008/PCIE
Optional
-
IF2008/ETH
Optional
-
IFL2422/LED
Optional
- IFL24x1/LED configurable component family Optional Only for source configuration configuration-19e90221593ab4b472188eb6: IFS2405-0.3; selected configuration must be matched before display.
Cables
-
SC2415-x/IF2008
Optional
-
SC2415-x/IF2008ETH
Optional
-
SC2415-x/OE
Optional
-
SC2471-x/IF2008
Optional
-
SC2471-3/IF2008ETH
Optional
-
SC2471-x/RS422/OE
Optional
The industries we serve
Frequently asked questions
Answers to the most common questions about our products and services
The measuring span is 0.3 mm and starts approximately 6 mm from the sensor face. Position the target so that the expected motion stays within the window.
The datasheet specifies less than 18 nm RMS noise at mid-span at a 1 kHz measuring rate. This value describes noise under the specified test conditions.
The datasheet lists 0.015 mm for glass with a refractive index of 1.5 under the specified test conditions. For a different material, verify that the controller can resolve the returns from both surfaces.
Get a quote or advice
Tell us what you need and an engineer will come back to you.