IFS2406-2.5/VAC(003)
From the IFS2406 series
Confocal heads for distance and thickness measurement, including dedicated vacuum versions. Beam geometry depends on the model.
Technical specification
Every engineering figure, laid out to scan quickly
| Measuring range | 2.5 mm |
|---|---|
| Start of measuring range | 17.2 mm |
| Light spot diameter | 0.01 mm |
| Maximum measuring angle | 16 deg |
| Storage temperature | -20–70 °C |
| Operating temperature | 5–70 °C |
| Weight | 0.105 kg |
| Mounting | Radial clamping (mounting adapter see accessories) |
| Technical specification details | 0-2.5 mm mapped range. Official vacuum-compatible sensor construction. |
| Accuracy | 0.6 µm |
| Minimum target thickness | 0.125 mm |
| Target material | reflective, diffuse as well as transparent surfaces (e.g. glass) |
| Sampling rate limited by system readout | True |
| Linearity reference | Stored as the conservative published family/model accuracy for catalog filtering. |
| Sampling rate reference | Maximum mapped family rate 70,000 Hz; verify the exact model and operating mode. |
| Contact | Non-contact |
Values by configuration
These values differ with the controller or interface the sensor is used with. Each row applies to one configuration only; check the configuration in the system builder or with us.
| Interfaces | Ethernet |
|---|---|
| Interfaces | EtherCAT |
| Numerical aperture (NA) | 0.30 |
| Numerical aperture (NA) | 0.3 |
| Protection class (DIN EN 60529) | IP40 |
| Protection class (DIN EN 60529) | IP64 |
| Resolution | 0.009 µm |
| Resolution | 0.097 µm |
Compatible system components
Controllers
-
IFC2411
Required
- Measuring rate
- 8 kHz
- Communication
- Ethernet, RS422
- Inputs
- 1
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2411/IE
Required
- Measuring rate
- 8 kHz
- Communication
- RS422, PROFINET, EtherNet/IP, EtherCAT
- Inputs
- 1
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2412
Required
- Measuring rate
- 8 kHz
- Communication
- RS422, Ethernet
- Inputs
- 2
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2412/IE
Required
- Measuring rate
- 8 kHz
- Communication
- EtherCAT, RS422
- Inputs
- 2
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2416
Required
- Measuring rate
- 25 kHz
- Communication
- Ethernet, RS422
- Inputs
- 1
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2417
Required
- Measuring rate
- 25 kHz
- Communication
- RS422, Ethernet
- Inputs
- 2
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2417/IE
Required
- Measuring rate
- 25 kHz
- Communication
- EtherCAT, RS422
- Inputs
- 2
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2421
Required
- Measuring rate
- 10 kHz
- Communication
- Ethernet, RS422, EtherCAT
- Inputs
- 1
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2421MP
Required
- Measuring rate
- 10 kHz
- Communication
- EtherCAT, Ethernet, RS422
- Inputs
- 1
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2422
Required
- Measuring rate
- 10 kHz
- Communication
- EtherCAT, Ethernet, RS422
- Inputs
- 2
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2422MP
Required
- Measuring rate
- 10 kHz
- Communication
- Ethernet, EtherCAT, RS422
- Inputs
- 2
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2465
Required
- Measuring rate
- 30 kHz
- Communication
- Ethernet, EtherCAT, RS422
- Inputs
- 1
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2465MP
Required
- Measuring rate
- 30 kHz
- Communication
- EtherCAT, RS422, Ethernet
- Inputs
- 1
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2466
Required
- Measuring rate
- 30 kHz
- Communication
- EtherCAT, Ethernet, RS422
- Inputs
- 2
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
-
IFC2466MP
Required
- Measuring rate
- 30 kHz
- Communication
- RS422, Ethernet, EtherCAT
- Inputs
- 2
- Signal type
- Analog voltage, Analog current, RS422, Digital (EtherCAT/Ethernet)
Compatible accessories
Optical fibres
-
C2401-x
Required with the chosen components
-
C2401/PT3-x
Required with the chosen components
-
C2401-x(10)
Required with the chosen components
-
C2401-x(20)
Required with the chosen components
-
C2400-x
Required with the chosen components
-
C2400/PT-x
Required with the chosen components
-
C2400/PT-x-Vac
Required with the chosen components
Power supplies
-
PS2020 (2420062)
Optional
Mounting
-
MA2406-20
Optional
-
JMA-20
Optional
-
JMA-Thickness-20
Optional
Accessories
-
C2402/Vac/KF16
Optional
-
C2405/Vac/1/KF16
Optional
-
C2405/Vac/1/CF16
Optional
-
C2405/Vac/6/CF63
Optional
Complementary products
-
IF2001/USB
Optional
-
IF2008/ETH
Optional
-
IF1032/ETH
Optional
-
IF2004/USB
Optional
-
IF2008/PCIE
Optional
-
IFL2422/LED
Optional
- IFL24x1/LED configurable component family Optional Only for source configuration configuration-fdb850060c76994ab6caceb9: IFS2406-2.5/VAC(003); selected configuration must be matched before display.
Cables
-
SC2415-x/IF2008
Optional
-
SC2415-x/IF2008ETH
Optional
-
SC2415-x/OE
Optional
-
SC2471-x/IF2008
Optional
-
SC2471-3/IF2008ETH
Optional
-
SC2471-x/RS422/OE
Optional
The industries we serve
Frequently asked questions
Answers to the most common questions about our products and services
The measuring span is 2.5 mm and starts approximately 17.2 mm from the sensor face. Position the target so that the expected motion stays within the window.
The datasheet specifies less than 97 nm RMS noise at mid-span at a 1 kHz measuring rate. This value describes noise under the specified test conditions.
The datasheet lists this as a vacuum-compatible head. Check that the fiber and feedthrough suit the chamber pressure and connectors, and verify sealing for the installation.
Get a quote or advice
Tell us what you need and an engineer will come back to you.