Skip to content

1-C6B/10MN

From the C6B series

Column-type compression force transducer for high loads. Selected versions have a central bore. Fixed cable, connector and TEDS options depend on configuration.

Force range
0–10000000 N
Download the datasheet (opens in a new tab) This series on the HBK site (opens in a new tab)

Technical specification

Every engineering figure, laid out to scan quickly

Technical specification for 1-C6B/10MN
Force range 0–10000000 N
Accuracy class ⁦0.5%⁩
Outputs and interfaces Unknown
Pressure sensor output mV/V (passive strain gauge)
Technical specification details Maximum capacity (nominal load): 10 MN; Output signal: mV/V (passive strain gauge); Mechanical interfaces: Column type; Height (without accessories): 9.45 in; Diameter (without cable or plug): 10.51179 in
Ordering options and constraints K-C6B — capacity: 200 kN, 500 kN, 1 MN, 2 MN, 5 MN, 10 MN; output_signal: mV/V (passive strain gauge), Voltage (0…10V), Current (4-20mA); mechanical_interfaces: Hole through type, Column type; height_without_accessories: 2.36 in, 3.94 in, 7.09 in, 9.45 in; diameter_without_cable_or_plug: 6.25983 in, 3.1496 in; constraints: []
Load mode Compression only
Linearity reference No single accuracy class is inferred when it is not shown for the exact ordering code.
Sampling rate reference The selected HBK conditioner, filter and DAQ determine the digital sample rate.
Sampling rate limited by system readout True
Repeatability reference Use the individual calibration certificate and installed-chain verification; no unsupported scalar repeatability is inferred.
Request a quote for this product

The industries we serve

Get a quote or advice

Tell us what you need and an engineer will come back to you.

Request a quote for this product
What would you like to ask for?

Email or phone — one of them is enough

Email or phone — one of them is enough

0 of 500 words