Skip to content

1-U10F/1.25MN

From the U10F series

Low-profile strain-gauge transducer for compression and tension, including cyclic loads. Available with mV/V or integrated IO-Link. Ingress protection depends on the connector or cable, up to IP68 with the cable option.

Force range
0–1250000 N
Download the datasheet (opens in a new tab) This series on the HBK site (opens in a new tab)

Technical specification

Every engineering figure, laid out to scan quickly

Technical specification for 1-U10F/1.25MN
Force range 0–1250000 N
Accuracy class ⁦0.05%⁩
Outputs and interfaces Unknown
Pressure sensor output mV/V (passive strain gauge)
Technical specification details Maximum capacity (nominal load): 1.25 MN; Output signal: mV/V (passive strain gauge); Height (without accessories): 5 in; Diameter (without cable or plug): 15.3543 in
ADC sampling rate 40000 samples/s
Ordering options and constraints K-U10F — capacity: 50 kN, 125 kN, 250 kN, 500 kN, 1.25 MN; output_signal: mV/V (passive strain gauge), IO-Link; height_without_accessories: 1.75 in, 2.5 in, 3.5 in, 5 in; diameter_without_cable_or_plug: 15.3543 in, 6.059043 in, 7.999984 in, 10.98423 in; constraints: []
Load mode Compression and tension
Linearity reference No single accuracy class is inferred when it is not shown for the exact ordering code.
Sampling rate reference The selected HBK conditioner, filter and DAQ determine the digital sample rate.
Sampling rate limited by system readout True
Repeatability reference Use the individual calibration certificate and installed-chain verification; no unsupported scalar repeatability is inferred.
Request a quote for this product

The industries we serve

Get a quote or advice

Tell us what you need and an engineer will come back to you.

Request a quote for this product
What would you like to ask for?

Email or phone — one of them is enough

Email or phone — one of them is enough

0 of 500 words