1-U10F/50KN
From the U10F series
Low-profile strain-gauge transducer for compression and tension, including cyclic loads. Available with mV/V or integrated IO-Link. Ingress protection depends on the connector or cable, up to IP68 with the cable option.
- Force range
- 0–50000 N
Technical specification
Every engineering figure, laid out to scan quickly
| Force range | 0–50000 N |
|---|---|
| Accuracy class | 0.04% |
| Outputs and interfaces | Unknown |
| Pressure sensor output | mV/V (passive strain gauge) |
| Technical specification details | Maximum capacity (nominal load): 50 kN; Output signal: mV/V (passive strain gauge); Height (without accessories): 1.75 in; Diameter (without cable or plug): 6.059043 in |
| ADC sampling rate | 40000 samples/s |
| Ordering options and constraints | K-U10F — capacity: 50 kN, 125 kN, 250 kN, 500 kN, 1.25 MN; output_signal: mV/V (passive strain gauge), IO-Link; height_without_accessories: 1.75 in, 2.5 in, 3.5 in, 5 in; diameter_without_cable_or_plug: 15.3543 in, 6.059043 in, 7.999984 in, 10.98423 in; constraints: [] |
| Load mode | Compression and tension |
| Linearity reference | No single accuracy class is inferred when it is not shown for the exact ordering code. |
| Repeatability reference | Use the individual calibration certificate and installed-chain verification; no unsupported scalar repeatability is inferred. |
| Sampling rate reference | The selected HBK conditioner, filter and DAQ determine the digital sample rate. |
| Sampling rate limited by system readout | True |
The industries we serve
Get a quote or advice
Tell us what you need and an engineer will come back to you.

