Skip to content

1-U9C/100N

From the U9C series

Miniature strain-gauge transducer for compression and tension. Rated IP67. Options include passive mV/V or an inline amplifier with voltage, current or IO-Link.

Force range
0–100 N
Download the datasheet (opens in a new tab) This series on the HBK site (opens in a new tab)

Technical specification

Every engineering figure, laid out to scan quickly

Technical specification for 1-U9C/100N
Accuracy class ⁦0.2%⁩
Outputs and interfaces Unknown
Protection class (DIN EN 60529) IP67
Pressure sensor output mV/V (passive strain gauge)
Technical specification details Maximum capacity (nominal load): 100 N; Output signal: mV/V (passive strain gauge); Height (without accessories): 1.65 in; Diameter (without cable or plug): 0.70866 in
Ordering options and constraints K-U9C — capacity: 50 N, 100 N, 200 N, 0.5 kN, 1 kN, 2 kN, 5 kN, 10 kN, 20 kN, 50 kN; cable_length: 1.5 m, 3 m, 5 m, 6 m, 7 m, 12 m; output: mV/V, 0…10 V, 4…20 mA, IO-Link, VA1, VA2, VAIO; connector: Y, F, Q, N, M, M12; teds: Not selected, T; mechanical_interface: Both sides central external thread; constraints: [{"when": {"output": ["VA1", "VA2", "VAIO"]}, "allow": {"cable_length": ["1.5 m", "3 m"]}, "reason": "HBK limits inline-amplifier variants to the documented short cable lengths."}, {"when": {"teds": "T"}, "deny": {"connector": "M12", "output": ["VA1", "VA2", "VAIO"]}, "reason": "TEDS is available with plug variants, not free-end/M12 or inline-amplifier variants."}]
Load mode Compression and tension
Repeatability reference Use the individual calibration certificate and installed-chain verification; no unsupported scalar repeatability is inferred.
Sampling rate reference The selected HBK conditioner, filter and DAQ determine the digital sample rate.
Sampling rate limited by system readout True
Linearity reference No single accuracy class is inferred when it is not shown for the exact ordering code.

Values by configuration

These values differ with the controller or interface the sensor is used with. Each row applies to one configuration only; check the configuration in the system builder or with us.

Force range 0–100 N
Force range -100–100 N
Request a quote for this product

The industries we serve

Get a quote or advice

Tell us what you need and an engineer will come back to you.

Request a quote for this product
What would you like to ask for?

Email or phone — one of them is enough

Email or phone — one of them is enough

0 of 500 words