dataVIEW Software
תוכנת איסוף לרישום, לניתוח ולדיווח של נתוני חיישנים.
- up to 32 synchronised
- 25 kHz per channel
- CSV, HDF5, PDF report
Measurement solutions for pharmaceutical production
Pharmaceutical industry
What we solve in pharma production
Pharmaceutical lines are judged on repeatability and the documentation chain, not peak accuracy. We supply the non-contact sensors that verify fill level, cap height, blister forming depth and tablet thickness at line speed, calibrate them in our ISO 9001 certified lab, and issue the traceable calibration certificate your quality system requires.
Applications
-
Fill level verification
Non-contact level measurement in vials and ampoules at full line speed, catching an underfill before the labeller.
-
Cap height and closure
Laser triangulation confirms every cap is seated — the check that prevents a batch recall.
-
Blister forming depth
Confocal measurement of the formed cavity depth, on clear PVC where a triangulation sensor cannot read.
-
Tablet thickness and hardness
In-line thickness measurement as part of the press feedback loop, not an off-line sample.
-
Label position and skew
Optical edge sensing to verify label position within tolerance on cylindrical containers.
-
Cleanroom temperature mapping
Thermal imaging for validation runs and continuous monitoring of critical zones.
-
Calibration and documentation
Scheduled recalibration with traceable certificates, so the instrument file is always audit-ready.
Related products
-
-
dataGATEWAY IO
שער המחבר חיישנים אנלוגיים וחיישני IO-Link אל אפיק התקשורת של המפעל.
- 8 analogue or 8 IO-Link
- 10 kHz
- EtherCAT, PROFINET, EtherNet/IP
-
dataCONTROL C4
בקר בארבעה ערוצים המסנכרן ומעבד כניסות של חיישנים.
- 4, synchronised
- 25 kHz per channel
- Thickness, difference, min/max, flatness
-
Frequently asked questions
Answers to the most common questions about our products and services
Usually five to ten working days from when your samples reach our lab. You get a written report with the measured results and a recommended configuration.
Both. We can supply the instrument alone, or install, align, configure and prove it on your line with a measurement capability test before handover.
Contact us
Tell us what you need to measure and an engineer will get back to you.
Send us a message
- Address 29 HaMetzuda St, Azor, P.O.B. 11475
- Phone 03-1234567
- Email sales@elinatech.com
- Opening hours Sun–Thu, 08:30–18:00