Technical articles
Selection guides written for the engineer who has to choose a sensor and justify the choice. Every article starts from a real question that reached us from the field — which technology suits this surface, what the accuracy figure on the datasheet really means, and when it was measured under conditions that have nothing to do with your production line. There are no marketing comparisons here: there are explanations of the measuring principle, of what actually defeats it, and of what to check before you order.
Technical articles
-
Technical articles
Displacement sensor or accelerometer: how to choose for vibration measurement
Frequency alone does not choose a vibration sensor. Compare displacement and acceleration, measurement reference, dynamic noise, bandwidth and mounting. Read more -
Technical articles
Choosing a laser line scanner: how to calculate point spacing
Point count alone does not establish laser scanner capability. Calculate spacing at the actual working distance, then check usable data and measurement… Read more -
Technical articles
Connecting a sensor to a PLC: preserving resolution and sampling performance
A practical guide to the complete sensor-to-PLC measurement chain: quantization, input-range utilization, noise, sampling rates and synchronization. Read more -
Technical articles
LVDT vs non-contact sensor: when is contact the better choice?
Non-contact is not automatically better. Learn when an LVDT contact gauge is the right choice, and when to use laser, eddy current,… Read more -
Technical articles
Laser triangulation on shiny surfaces
On a shiny surface the laser reflection scatters less; choose a sensor with automatic exposure control and mount it at the right… Read more -
Technical articles
Laser or confocal: how to choose a distance sensor
Your target surface makes the decision, not the accuracy figure on the datasheet. Read more -
Technical articles
Emissivity, and why your pyrometer shows the wrong temperature
An infrared thermometer measures radiation. Turning it into temperature takes one number that you have to supply. Read more -
Technical articles
How often does an instrument really need calibrating?
The honest answer is that it depends, and here is what it depends on. Read more -
Technical articles
Thickness measurement: one sensor or two?
Whether your material is transparent decides the whole architecture. Read more
Contact us
Tell us what you need to measure and an engineer will get back to you.
- Address 29 Hametzuda St., Azur Industrial Zone Azur 5800173, Israel · POB 11475
- Phone 03-5590277
- Email sales@elinatech.com
- Opening hours Sun–Thu, 08:30–18:00